Benchmark #21274 - pibenchmarks.com

Brand: SanDisk Extreme Portable
SSD (Portable)
#41 / 1,539
273
#321 / 1,539
#307 / 875
#54 / 137
7,295
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-04-28 04:34:03
#21,274
5,970
-1,325 (-22.19%)
Anonymous

Storage Details
SanDisk Extreme Portable
SSD (Portable)
250G
SSD
SanDisk
SD9SN8W256G
M.2
SATA
3.00
5,000
1d6b:558c
0x1d6b (Linux Foundation)
0x558c
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
94.6 MB/s
245.78 MB/s
226.83 MB/s
6,977 IOPS
11,191 IOPS
27,911 KB/s
44,765 KB/s
26,638 KB/s
21,520 KB/s
18,603 KB/s
26,373 KB/s

inxi Results
System: Kernel: 4.19.50-rt22-v7l armv7l bits: 32 compiler: gcc v: 8.3.0 parameters: 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:800x600M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 Plus charge: Full status: Discharging Memory: RAM: total: 3.89 GiB used: 280.5 MiB (7.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 800x600 s-dpi: 96 s-size: 211x158mm (8.3x6.2") s-diag: 264mm (10.4") Monitor-1: HDMI-1 res: 800x600 hz: 60 dpi: 29 size: 708x398mm (27.9x15.7") diag: 812mm (32") OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.50-rt22-v7l Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 247.37 GiB used: 10.13 GiB (4.1%) ID-1: /dev/mmcblk0 model: SA16G size: 14.48 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: SanDisk model: SD9SN8W256G size: 232.89 GiB block size: physical: 4096 B logical: 512 B rev: 1012 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 232.63 GiB size: 228.93 GiB (98.41%) used: 10.08 GiB (4.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: efc2ea8b-042f-47f5-953e-577d8860de55 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.2:3 info: Arduino SA Leonardo (CDC ACM HID) type: Abstract (modem),CDC-Data,HID driver: cdc_acm,hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 2341:8036 Device-2: 1-1.3:4 info: Logitech Unifying Receiver type: Mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52f Device-3: 1-1.4:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-4: 2-1:2 info: SanDisk type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0781:558c Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.5% command: init pid: 1 mem: 7.88 MiB (0.2%) 2: cpu: 2.7% command: systemd-udevd pid: 172 mem: 4.26 MiB (0.1%) 3: cpu: 2.3% command: [irq/55-xhci_hcd] pid: 77 mem: 0.00 MiB (0.0%) 4: cpu: 2.3% command: xorg pid: 577 mem: 45.8 MiB (1.1%) 5: cpu: 2.0% command: lxpanel pid: 734 mem: 28.0 MiB (0.7%) Memory top: 5 1: mem: 48.3 MiB (1.2%) command: lxterminal pid: 1119 cpu: 1.3% 2: mem: 45.8 MiB (1.1%) command: xorg pid: 577 cpu: 2.3% 3: mem: 28.0 MiB (0.7%) command: lxpanel pid: 734 cpu: 2.0% 4: mem: 21.0 MiB (0.5%) command: pcmanfm pid: 736 cpu: 0.7% 5: mem: 15.7 MiB (0.4%) command: openbox pid: 729 cpu: 0.3% Info: Processes: 189 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.50-rt22-v7l armv7l bits: 32 compiler: gcc v: 8.3.0 
           parameters: 8250.nr_uarts=0 cma=64M cma=256M 
           video=HDMI-A-1:800x600M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Battery:   Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400 Plus 
           charge: Full status: Discharging 
Memory:    RAM: total: 3.89 GiB used: 280.5 MiB (7.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: modesetting unloaded: fbdev 
           display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 800x600 s-dpi: 96 s-size: 211x158mm (8.3x6.2") s-diag: 264mm (10.4") 
           Monitor-1: HDMI-1 res: 800x600 hz: 60 dpi: 29 size: 708x398mm (27.9x15.7") 
           diag: 812mm (32") 
           OpenGL: renderer: V3D 4.2 v: 2.1 Mesa 19.3.2 direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.50-rt22-v7l 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 247.37 GiB used: 10.13 GiB (4.1%) 
           ID-1: /dev/mmcblk0 model: SA16G size: 14.48 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: SanDisk model: SD9SN8W256G size: 232.89 GiB 
           block size: physical: 4096 B logical: 512 B rev: 1012 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 232.63 GiB size: 228.93 GiB (98.41%) used: 10.08 GiB (4.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: efc2ea8b-042f-47f5-953e-577d8860de55 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.3 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 9F2D-0578 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.2:3 info: Arduino SA Leonardo (CDC ACM HID) 
           type: Abstract (modem),CDC-Data,HID driver: cdc_acm,hid-generic,usbhid interfaces: 3 
           rev: 2.0 speed: 12 Mb/s chip ID: 2341:8036 Device-2: 1-1.3:4 info: Logitech Unifying Receiver type: Mouse,HID 
           driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52f 
           Device-3: 1-1.4:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID 
           driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
           chip ID: 046d:c52b 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-4: 2-1:2 info: SanDisk type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 0781:558c Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.5% command: init pid: 1 mem: 7.88 MiB (0.2%) 
           2: cpu: 2.7% command: systemd-udevd pid: 172 mem: 4.26 MiB (0.1%) 
           3: cpu: 2.3% command: [irq/55-xhci_hcd] pid: 77 mem: 0.00 MiB (0.0%) 
           4: cpu: 2.3% command: xorg pid: 577 mem: 45.8 MiB (1.1%) 
           5: cpu: 2.0% command: lxpanel pid: 734 mem: 28.0 MiB (0.7%) 
           Memory top: 5 
           1: mem: 48.3 MiB (1.2%) command: lxterminal pid: 1119 cpu: 1.3% 
           2: mem: 45.8 MiB (1.1%) command: xorg pid: 577 cpu: 2.3% 
           3: mem: 28.0 MiB (0.7%) command: lxpanel pid: 734 cpu: 2.0% 
           4: mem: 21.0 MiB (0.5%) command: pcmanfm pid: 736 cpu: 0.7% 
           5: mem: 15.7 MiB (0.4%) command: openbox pid: 729 cpu: 0.3% 
Info:      Processes: 189 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21274 - Brand: SanDisk Extreme Portable