Benchmark #21618 - pibenchmarks.com

Brand: FNK Tech USB SD Card Reader
USB Flash
#82 / 1,539
128
#1,258 / 1,539
#36 / 90
#38 / 86
1,024
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.sg

Overview
2020-04-29 12:22:26
#21,618
399
-625 (-156.64%)
Anonymous
emmc

Storage Details
FNK Tech USB SD Card Reader
USB Flash
28.7G
USB Flash
FNK
GenericMass-Storage
2109:0226
0x2109
0x0226 (OneTouch 5300 USB)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
2.8 MB/s
2.66 MB/s
2.59 MB/s
337 IOPS
465 IOPS
1,351 KB/s
1,860 KB/s
2,211 KB/s
2,126 KB/s
1,987 KB/s
2,036 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 Memory: RAM: total: 1.97 GiB used: 645.2 MiB (32.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x25 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth18dc35e state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth3a5c76f state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth6d7cccf state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth7c62dcd state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: vethb4c0e9e state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: vethc8d0bd0 state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: vethd030aeb state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 36.31 GiB used: 18.33 GiB (50.5%) ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Generic model: N/A size: 28.91 GiB block size: physical: 512 B logical: 512 B rev: 1.11 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.65 GiB size: 28.18 GiB (98.35%) used: 9.14 GiB (32.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/36871ce71290b07486a19d9b7461bb36ee73d756de3a8917c97427de2c71d955/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-4: /var/lib/docker/overlay2/5290ea67586c06b3496179198dce10db0e2c8053b86a7ec9076401f1fb3ea6b2/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-5: /var/lib/docker/overlay2/72e1aa3740d1f1ed489c2a2dc5890957a844d20ac90155f2c87f9328a36592fc/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-6: /var/lib/docker/overlay2/73c9126ae6d8c7db3be56818a32801728f19c3a825f37bf1ce981359fc3bd00c/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-7: /var/lib/docker/overlay2/ac15e7cfb916eb8efdff06c4b1a5bfe0e7d3b661b8b5adf2f09f4b939168eadd/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-8: /var/lib/docker/overlay2/c75245ea96f0ad82490d20a1f9714cf577fa19603ac3db400f36ba5b2f308d4b/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-9: /var/lib/docker/overlay2/daecde681c3c2b6a9793d15766ab0cb0bac2541960e536458dc893f21d4ed9f1/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-10: /var/lib/docker/overlay2/fe70a3673d3f17e29c49b97f2404dd710df1bbeeb8a17b4ab2b95e626db84568/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A ID-11: /var/lib/docker/overlay2/ffdb7eacdcb02b868ce8f7b2cc85b31e3d151358cc3a3c724976ac4cc518d035/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: GEMBIRD type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1908:0226 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 14.6% command: python3 pid: 3993 mem: 106.3 MiB (5.4%) 2: cpu: 3.1% command: pihole-ftl pid: 768 mem: 154.6 MiB (7.9%) 3: cpu: 1.4% command: python3 pid: 1882 mem: 37.9 MiB (1.9%) 4: cpu: 1.1% command: init pid: 1 mem: 8.18 MiB (0.4%) 5: cpu: 1.1% command: dockerd pid: 680 mem: 65.9 MiB (3.3%) Memory top: 5 1: mem: 154.6 MiB (7.9%) command: pihole-ftl pid: 768 cpu: 3.1% 2: mem: 106.3 MiB (5.4%) command: python3 pid: 3993 cpu: 14.6% 3: mem: 65.9 MiB (3.3%) command: dockerd pid: 680 cpu: 1.1% 4: mem: 44.3 MiB (2.2%) command: docker pid: 1403 cpu: 0.0% 5: mem: 37.9 MiB (1.9%) command: python3 pid: 1882 cpu: 1.4% Info: Processes: 199 Uptime: 7m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/sda2 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: b03111 
           Memory:    RAM: total: 1.97 GiB used: 645.2 MiB (32.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x25 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth18dc35e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: veth3a5c76f state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: veth6d7cccf state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-7: veth7c62dcd state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-8: vethb4c0e9e state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-9: vethc8d0bd0 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-10: vethd030aeb state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-11: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 36.31 GiB used: 18.33 GiB (50.5%) 
           ID-1: /dev/mmcblk0 vendor: SanDisk model: SL08G size: 7.40 GiB block size: 
           physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Generic model: N/A size: 28.91 GiB block size: 
           physical: 512 B logical: 512 B rev: 1.11 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.65 GiB size: 28.18 GiB (98.35%) used: 9.14 GiB (32.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/36871ce71290b07486a19d9b7461bb36ee73d756de3a8917c97427de2c71d955/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-4: /var/lib/docker/overlay2/5290ea67586c06b3496179198dce10db0e2c8053b86a7ec9076401f1fb3ea6b2/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-5: /var/lib/docker/overlay2/72e1aa3740d1f1ed489c2a2dc5890957a844d20ac90155f2c87f9328a36592fc/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-6: /var/lib/docker/overlay2/73c9126ae6d8c7db3be56818a32801728f19c3a825f37bf1ce981359fc3bd00c/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-7: /var/lib/docker/overlay2/ac15e7cfb916eb8efdff06c4b1a5bfe0e7d3b661b8b5adf2f09f4b939168eadd/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-8: /var/lib/docker/overlay2/c75245ea96f0ad82490d20a1f9714cf577fa19603ac3db400f36ba5b2f308d4b/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-9: /var/lib/docker/overlay2/daecde681c3c2b6a9793d15766ab0cb0bac2541960e536458dc893f21d4ed9f1/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-10: /var/lib/docker/overlay2/fe70a3673d3f17e29c49b97f2404dd710df1bbeeb8a17b4ab2b95e626db84568/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
           ID-11: /var/lib/docker/overlay2/ffdb7eacdcb02b868ce8f7b2cc85b31e3d151358cc3a3c724976ac4cc518d035/merged raw size: N/A size: 28.18 GiB used: 9.14 GiB (32.4%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 7.15 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Device-1: 1-1.1:3 info: GEMBIRD type: Mass Storage driver: usb-storage interfaces: 1 
           rev: 2.0 speed: 480 Mb/s chip ID: 1908:0226 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 14.6% command: python3 pid: 3993 mem: 106.3 MiB (5.4%) 
           2: cpu: 3.1% command: pihole-ftl pid: 768 mem: 154.6 MiB (7.9%) 
           3: cpu: 1.4% command: python3 pid: 1882 mem: 37.9 MiB (1.9%) 
           4: cpu: 1.1% command: init pid: 1 mem: 8.18 MiB (0.4%) 
           5: cpu: 1.1% command: dockerd pid: 680 mem: 65.9 MiB (3.3%) 
           Memory top: 5 
           1: mem: 154.6 MiB (7.9%) command: pihole-ftl pid: 768 cpu: 3.1% 
           2: mem: 106.3 MiB (5.4%) command: python3 pid: 3993 cpu: 14.6% 
           3: mem: 65.9 MiB (3.3%) command: dockerd pid: 680 cpu: 1.1% 
           4: mem: 44.3 MiB (2.2%) command: docker pid: 1403 cpu: 0.0% 
           5: mem: 37.9 MiB (1.9%) command: python3 pid: 1882 cpu: 1.4% 
Info:      Processes: 199 Uptime: 7m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #21618 - Brand: FNK Tech USB SD Card Reader