Benchmark #23403 - pibenchmarks.com

Brand: Transcend MTS Series
SSD (M.2 SATA)
#64 / 1,677
285
#326 / 1,677
#318 / 984
#15 / 115
8,703
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-06 16:51:15
#23,403
9,073
+370 (+4.08%)
Anonymous
Transcend

Storage Details
Transcend MTS Series
SSD (M.2 SATA)
256G
SSD
Transcend
TS256GMTS400
SATA
3.10
5,000
8564:7000
0x8564 (Transcend Information, Inc.)
0x7000 (HSDPA Modem)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,800 (+300)
550 (+50)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
190 MB/s
298.73 MB/s
244.96 MB/s
10,054 IOPS
25,632 IOPS
40,216 KB/s
102,528 KB/s
37,017 KB/s
30,027 KB/s
18,934 KB/s
36,696 KB/s

inxi Results
System: Kernel: 4.19.114-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether quiet splash plymouth.ignore-serial-consoles usbhid.mousepoll=0 Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 862.0 MiB (21.6%) gpu: 256.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: default res: 1920x1080 OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.114-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: mngtmpaddr noprefixroute scope: global IP v6: type: noprefixroute scope: global IP v6: type: dynamic noprefixroute scope: global IP v6: type: noprefixroute scope: link IF-ID-2: usb0 state: down mac: IF-ID-3: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: type: mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Drives: Local Storage: total: 245.83 GiB used: 81.86 GiB (33.3%) ID-1: /dev/mmcblk0 model: 00000 size: 7.35 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Transcend model: TS256GMTS400 size: 238.47 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 81.76 GiB (35.0%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.7 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 ID-3: /media/pi/6F36-D520 raw size: 7.35 GiB size: 7.34 GiB (99.80%) used: 53.4 MiB (0.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A uuid: 6F36-D520 Swap: Kernel: swappiness: 10 (default 60) cache pressure: 100 (default) ID-1: swap-1 type: file size: 4.00 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: Transcend Information type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 8564:7000 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi 2: deb https: //cran.ma.imperial.ac.uk/bin/linux/debian buster-cran35/ Active apt repos in: /etc/apt/sources.list.d/coral-edgetpu.list 1: deb https: //packages.cloud.google.com/apt coral-edgetpu-stable main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 4.9% command: xorg pid: 659 mem: 63.0 MiB (1.6%) 2: cpu: 2.2% command: vncserver-x11-core pid: 580 mem: 31.9 MiB (0.8%) 3: cpu: 1.3% command: lxpanel pid: 814 mem: 32.4 MiB (0.8%) 4: cpu: 1.2% command: init pid: 1 mem: 8.15 MiB (0.2%) 5: cpu: 1.1% command: tor pid: 645 mem: 30.4 MiB (0.8%) Memory top: 5 1: mem: 63.0 MiB (1.6%) command: xorg pid: 659 cpu: 4.9% 2: mem: 49.8 MiB (1.3%) command: lxterminal pid: 2032 cpu: 0.3% 3: mem: 36.0 MiB (0.9%) command: xsp4.exe started by: mono pid: 567 cpu: 0.6% 4: mem: 32.4 MiB (0.8%) command: lxpanel pid: 814 cpu: 1.3% 5: mem: 31.9 MiB (0.8%) command: vncserver-x11-core pid: 580 cpu: 2.2% Info: Processes: 176 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.114-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           modules-load=dwc2,g_ether quiet splash plymouth.ignore-serial-consoles 
           usbhid.mousepoll=0 
           Desktop: LXDE 0.10.0 info: lxpanel wm: Openbox 3.6.1 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 862.0 MiB (21.6%) gpu: 256.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 driver: fbturbo display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") 
           s-diag: 583mm (23") 
           Monitor-1: default res: 1920x1080 
           OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.114-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: mngtmpaddr noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: global 
           IP v6:  type: dynamic noprefixroute scope: global 
           IP v6:  type: noprefixroute scope: link 
           IF-ID-2: usb0 state: down mac:  
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  type: mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 245.83 GiB used: 81.86 GiB (33.3%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 7.35 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Transcend model: TS256GMTS400 size: 238.47 GiB 
           block size: physical: 512 B logical: 512 B scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 233.48 GiB (98.01%) used: 81.76 GiB (35.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 8f2a74a4-809c-471e-b4ad-a91bfd51d7c3 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.7 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 9969-E3D2 
           ID-3: /media/pi/6F36-D520 raw size: 7.35 GiB size: 7.34 GiB (99.80%) 
           used: 53.4 MiB (0.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: N/A 
           uuid: 6F36-D520 
Swap:      Kernel: swappiness: 10 (default 60) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 4.00 GiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: Transcend Information type: Mass Storage driver: uas 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 8564:7000 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           2: deb https: //cran.ma.imperial.ac.uk/bin/linux/debian buster-cran35/
           Active apt repos in: /etc/apt/sources.list.d/coral-edgetpu.list 
           1: deb https: //packages.cloud.google.com/apt coral-edgetpu-stable main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 4.9% command: xorg pid: 659 mem: 63.0 MiB (1.6%) 
           2: cpu: 2.2% command: vncserver-x11-core pid: 580 mem: 31.9 MiB (0.8%) 
           3: cpu: 1.3% command: lxpanel pid: 814 mem: 32.4 MiB (0.8%) 
           4: cpu: 1.2% command: init pid: 1 mem: 8.15 MiB (0.2%) 
           5: cpu: 1.1% command: tor pid: 645 mem: 30.4 MiB (0.8%) 
           Memory top: 5 
           1: mem: 63.0 MiB (1.6%) command: xorg pid: 659 cpu: 4.9% 
           2: mem: 49.8 MiB (1.3%) command: lxterminal pid: 2032 cpu: 0.3% 
           3: mem: 36.0 MiB (0.9%) command: xsp4.exe started by: mono pid: 567 cpu: 0.6% 
           4: mem: 32.4 MiB (0.8%) command: lxpanel pid: 814 cpu: 1.3% 
           5: mem: 31.9 MiB (0.8%) command: vncserver-x11-core pid: 580 cpu: 2.2% 
Info:      Processes: 176 Uptime: 8m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23403 - Brand: Transcend MTS Series