Benchmark #23896 - pibenchmarks.com

Brand: Intenso SSDSataIII Series
SSD (2.5" SATA)
#36 / 1,700
456
#250 / 1,700
#248 / 989
#5 / 370
16,183
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-10 07:22:14
#23,896
2,458
-13,725 (-558.38%)
Anonymous
MySSD

Storage Details
Intenso SSDSataIII Series
SSD (2.5" SATA)
256G
SSD
Intenso
SSDSATAIII
2.5 inch
SATA
2.00
480
152d:1576
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x1576 (External Disk 3.0)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
33.1 MB/s
27.99 MB/s
27.65 MB/s
3,773 IOPS
2,525 IOPS
15,094 KB/s
10,101 KB/s
9,445 KB/s
10,307 KB/s
9,367 KB/s
10,699 KB/s

inxi Results
System: Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 1002.1 MiB used: 167.9 MiB (16.8%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 80x24 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link IF-ID-1: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 268.29 GiB used: 1.38 GiB (0.5%) ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR SMART Message: Unknown smartctl error. Unable to get data. ID-2: /dev/sda type: USB vendor: Intenso model: JMS579 size: 238.47 GiB block size: physical: 512 B logical: 512 B rev: 0204 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 238.22 GiB size: 234.52 GiB (98.45%) used: 1.33 GiB (0.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 size: 29.56 GiB fs: ext4 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.5:4 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:1576 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.0% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 2: cpu: 1.5% command: init pid: 1 mem: 7.97 MiB (0.8%) 3: cpu: 0.1% command: systemd-journald pid: 102 mem: 6.38 MiB (0.6%) 4: cpu: 0.1% command: systemd-udevd pid: 142 mem: 3.79 MiB (0.4%) 5: cpu: 0.1% command: dbus-daemon pid: 325 mem: 3.34 MiB (0.3%) Memory top: 5 1: mem: 7.97 MiB (0.8%) command: init pid: 1 cpu: 1.5% 2: mem: 6.49 MiB (0.7%) command: systemd pid: 505 cpu: 0.0% 3: mem: 6.38 MiB (0.6%) command: systemd-journald pid: 102 cpu: 0.1% 4: mem: 6.12 MiB (0.6%) command: sshd: pid: 497 cpu: 0.0% 5: mem: 5.35 MiB (0.5%) command: systemd-logind pid: 333 cpu: 0.0% Info: Processes: 117 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 
           bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=d34db33f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
           Memory:    RAM: total: 1002.1 MiB used: 167.9 MiB (16.8%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 4 microcode: N/A bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
           4: 1200 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 80x24 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-1: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 268.29 GiB used: 1.38 GiB (0.5%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to get data. 
           ID-2: /dev/sda type: USB vendor: Intenso model: JMS579 size: 238.47 GiB block size: 
           physical: 512 B logical: 512 B rev: 0204 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 238.22 GiB size: 234.52 GiB (98.45%) used: 1.33 GiB (0.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.2 MiB (20.7%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 4BBD-D3E7 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.56 GiB fs: ext4 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /dev/sda1 size: 256.0 MiB fs: vfat label: boot uuid: 4BBD-D3E7 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter 
           type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 0424:ec00 
           Device-2: 1-1.5:4 info: JMicron / JMicron USA type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 152d:1576 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.0% command: [usb-storage] pid: 78 mem: 0.00 MiB (0.0%) 
           2: cpu: 1.5% command: init pid: 1 mem: 7.97 MiB (0.8%) 
           3: cpu: 0.1% command: systemd-journald pid: 102 mem: 6.38 MiB (0.6%) 
           4: cpu: 0.1% command: systemd-udevd pid: 142 mem: 3.79 MiB (0.4%) 
           5: cpu: 0.1% command: dbus-daemon pid: 325 mem: 3.34 MiB (0.3%) 
           Memory top: 5 
           1: mem: 7.97 MiB (0.8%) command: init pid: 1 cpu: 1.5% 
           2: mem: 6.49 MiB (0.7%) command: systemd pid: 505 cpu: 0.0% 
           3: mem: 6.38 MiB (0.6%) command: systemd-journald pid: 102 cpu: 0.1% 
           4: mem: 6.12 MiB (0.6%) command: sshd: pid: 497 cpu: 0.0% 
           5: mem: 5.35 MiB (0.5%) command: systemd-logind pid: 333 cpu: 0.0% 
Info:      Processes: 117 Uptime: 8m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #23896 - Brand: Intenso SSDSataIII Series