Benchmark #25758 - pibenchmarks.com

Brand: PNY CS900
SSD (2.5" SATA)
#35 / 1,539
294
#583 / 1,539
#561 / 875
#177 / 363
5,857
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-05-28 10:15:12
#25,758
6,719
+862 (+12.83%)
third
PNY SSD using quirk fix USB3 adapter on rpi4

Storage Details
PNY CS900
SSD (2.5" SATA)
120G
SSD
PNY
CS900120GBSSD
2.5 inch
SATA
3.00
5,000
1d6b:1561
0x1d6b (Linux Foundation)
0x1561
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
181 MB/s
162.71 MB/s
161.42 MB/s
5,219 IOPS
4,706 IOPS
20,876 KB/s
18,827 KB/s
29,435 KB/s
24,881 KB/s
21,163 KB/s
27,663 KB/s

inxi Results
System: Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:1561:u console=ttyS0,115200 console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Memory: RAM: total: 3.89 GiB used: 317.5 MiB (8.0%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 179x46 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.97-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-3: hassio state: up speed: N/A duplex: N/A mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-4: veth9cecc84 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: vethd07c684 state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: wlan0 state: down mac: WAN IP: Drives: Local Storage: total: 111.79 GiB used: 3.95 GiB (3.5%) ID-1: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: PNY drive model: CS900 120GB SSD size: 111.79 GiB block size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: CS900613 temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 27 written: 8 KiB Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 111.54 GiB size: 109.79 GiB (98.43%) used: 1.95 GiB (1.8%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 45e99191-771b-4e12-a526-0779148892cb ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.7 MiB (20.1%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 ID-3: /var/lib/docker/overlay2/99c01a1b30f1118b9e78015c2d7d1759b9b1625d9ed778d2128f4bff3912f382/merged raw size: N/A size: 109.79 GiB used: 1.95 GiB (1.8%) fs: overlay source: ERR-102 label: N/A uuid: N/A Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 152d:1561 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.7% command: init pid: 1 mem: 7.96 MiB (0.2%) 2: cpu: 2.1% command: python3 pid: 1456 mem: 33.8 MiB (0.8%) 3: cpu: 1.3% command: dockerd pid: 624 mem: 58.4 MiB (1.4%) 4: cpu: 0.9% command: systemd-journald pid: 102 mem: 7.46 MiB (0.1%) 5: cpu: 0.8% command: [usb-storage] pid: 76 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 58.4 MiB (1.4%) command: dockerd pid: 624 cpu: 1.3% 2: mem: 42.2 MiB (1.0%) command: docker pid: 968 cpu: 0.1% 3: mem: 33.8 MiB (0.8%) command: python3 pid: 1456 cpu: 2.1% 4: mem: 31.6 MiB (0.8%) command: containerd pid: 623 cpu: 0.3% 5: mem: 15.4 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 pid: 617 cpu: 0.2% Info: Processes: 138 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

inxi Results

System:    Kernel: 4.19.97-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:1561:u console=ttyS0,115200 
           console=tty1 root=PARTUUID=738a4d67-02 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 
           Memory:    RAM: total: 3.89 GiB used: 317.5 MiB (8.0%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 179x46 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.97-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: docker0 state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: eth0 state: up speed: 100 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: noprefixroute scope: link 
           IF-ID-3: hassio state: up speed: N/A duplex: N/A mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-4: veth9cecc84 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: vethd07c684 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-6: wlan0 state: down mac:  
           WAN IP:  
Drives:    Local Storage: total: 111.79 GiB used: 3.95 GiB (3.5%) 
           ID-1: /dev/sda type: USB vendor: Sabrent model: SABRENT drive vendor: PNY 
           drive model: CS900 120GB SSD size: 111.79 GiB block size: physical: 512 B 
           logical: 512 B sata: 3.2 speed: 6.0 Gb/s rev: 0204 drive rev: CS900613 temp: 33 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 2 hrs cycles: 27 written: 8 KiB 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 111.54 GiB size: 109.79 GiB (98.43%) used: 1.95 GiB (1.8%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 45e99191-771b-4e12-a526-0779148892cb 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 50.7 MiB (20.1%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 4BBD-D3E7 
           ID-3: /var/lib/docker/overlay2/99c01a1b30f1118b9e78015c2d7d1759b9b1625d9ed778d2128f4bff3912f382/merged raw size: N/A size: 109.79 GiB used: 1.95 GiB (1.8%) fs: overlay source: ERR-102 
           label: N/A uuid: N/A 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS561U two ports SATA 6Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s 
           chip ID: 152d:1561 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.7% command: init pid: 1 mem: 7.96 MiB (0.2%) 
           2: cpu: 2.1% command: python3 pid: 1456 mem: 33.8 MiB (0.8%) 
           3: cpu: 1.3% command: dockerd pid: 624 mem: 58.4 MiB (1.4%) 
           4: cpu: 0.9% command: systemd-journald pid: 102 mem: 7.46 MiB (0.1%) 
           5: cpu: 0.8% command: [usb-storage] pid: 76 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 58.4 MiB (1.4%) command: dockerd pid: 624 cpu: 1.3% 
           2: mem: 42.2 MiB (1.0%) command: docker pid: 968 cpu: 0.1% 
           3: mem: 33.8 MiB (0.8%) command: python3 pid: 1456 cpu: 2.1% 
           4: mem: 31.6 MiB (0.8%) command: containerd pid: 623 cpu: 0.3% 
           5: mem: 15.4 MiB (0.3%) command: unattended-upgrade-shutdown started by: python3 
           pid: 617 cpu: 0.2% 
Info:      Processes: 138 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.00

Benchmark #25758 - Brand: PNY CS900