Benchmark #26128 - pibenchmarks.com

Brand: SanDisk Extreme Portable
SSD (Portable)
#65 / 1,679
298
#440 / 1,679
#425 / 984
#62 / 144
7,452
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-01 11:06:18
#26,128
10,269
+2,817 (+27.43%)
Diet Lover
Sundisk Portable - DietPi RP14B

Storage Details
SanDisk Extreme Portable
SSD (Portable)
500G
SSD
SanDisk
SD9SN8W512G
M.2
SATA
3.00
5,000
0781:558c
0x0781 (SanDisk Corp.)
0x558c
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
2,100 (+600)
750 (+250)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
211 MB/s
304.15 MB/s
265.82 MB/s
15,125 IOPS
30,567 IOPS
60,502 KB/s
122,268 KB/s
37,395 KB/s
31,381 KB/s
22,559 KB/s
37,839 KB/s

inxi Results
System: Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet net.ifnames=0 Desktop: MATE 1.20.4 info: mate-panel, plank wm: marco 1.20.3 dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.89 GiB used: 811.2 MiB (20.4%) gpu: 512.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 0 Speed: 656 MHz min/max: 656/2295 MHz Core speeds (MHz): 1: 656 2: 656 3: 656 4: 656 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.Org 1.20.4 compositor: marco v: 1.20.3 driver: fbdev unloaded: modesetting display ID: :0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23") Monitor-1: default res: 1920x1080 OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.118-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global IF-ID-3: wlan0 state: up mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 465.76 GiB used: 2.84 GiB (0.6%) ID-1: /dev/sda type: USB vendor: SanDisk model: SD9SN8W512G size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 1012 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.51 GiB size: 458.30 GiB (98.45%) used: 2.79 GiB (0.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 1-1.4:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 05e3:0610 Device-1: 1-1.4.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 Device-2: 1-1.4.4:5 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-3: 2-2:2 info: SanDisk type: Mass Storage driver: uas interfaces: 1 rev: 3.1 speed: 5 Gb/s chip ID: 0781:558c Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/dietpi-wireguard.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main ui Active apt repos in: /etc/apt/sources.list.d/remmina_raspbian.list 1: deb https: //www.remmina.org/raspbian/ buster main Processes: CPU top: 5 1: cpu: 12.0% command: xorg pid: 500 mem: 106.9 MiB (3.0%) 2: cpu: 4.6% command: conky pid: 822 mem: 18.1 MiB (0.5%) 3: cpu: 3.2% command: shairport-sync pid: 1275 mem: 3.21 MiB (0.0%) 4: cpu: 1.9% command: plank pid: 831 mem: 32.6 MiB (0.9%) 5: cpu: 1.8% command: init pid: 1 mem: 7.94 MiB (0.2%) Memory top: 5 1: mem: 106.9 MiB (3.0%) command: xorg pid: 500 cpu: 12.0% 2: mem: 49.4 MiB (1.4%) command: caja pid: 802 cpu: 1.4% 3: mem: 38.3 MiB (1.1%) command: mate-menu pid: 807 cpu: 1.8% 4: mem: 35.3 MiB (1.0%) command: mate-terminal pid: 1052 cpu: 1.1% 5: mem: 32.6 MiB (0.9%) command: plank pid: 831 cpu: 1.9% Info: Processes: 158 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

inxi Results

System:    Kernel: 4.19.118-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1920 
           bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 
           root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           quiet net.ifnames=0 
           Desktop: MATE 1.20.4 info: mate-panel, plank wm: marco 1.20.3 dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.89 GiB used: 811.2 MiB (20.4%) gpu: 512.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 0 
           Speed: 656 MHz min/max: 656/2295 MHz Core speeds (MHz): 1: 656 2: 656 3: 656 4: 656 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.Org 1.20.4 compositor: marco v: 1.20.3 driver: fbdev 
           unloaded: modesetting display ID: :0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") 
           s-diag: 583mm (23") 
           Monitor-1: default res: 1920x1080 
           OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 19.3.2 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.118-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wg0 state: unknown speed: N/A duplex: N/A mac: N/A 
           IP v4:  scope: global 
           IF-ID-3: wlan0 state: up mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 465.76 GiB used: 2.84 GiB (0.6%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: SD9SN8W512G size: 465.76 GiB 
           block size: physical: 4096 B logical: 512 B rev: 1012 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.51 GiB size: 458.30 GiB (98.45%) used: 2.79 GiB (0.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.6 MiB (21.3%) 
           fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: 5203-DB74 
Swap:      Alert: No Swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 1-1.4:3 info: Genesys Logic 4-port hub ports: 4 rev: 2.0 speed: 480 Mb/s 
           chip ID: 05e3:0610 
           Device-1: 1-1.4.1:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0006 
           Device-2: 1-1.4.4:5 info: Pixart Imaging Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-3: 2-2:2 info: SanDisk type: Mass Storage driver: uas interfaces: 1 rev: 3.1 
           speed: 5 Gb/s chip ID: 0781:558c Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/dietpi-wireguard.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main ui
           Active apt repos in: /etc/apt/sources.list.d/remmina_raspbian.list 
           1: deb https: //www.remmina.org/raspbian/ buster main
Processes: CPU top: 5 
           1: cpu: 12.0% command: xorg pid: 500 mem: 106.9 MiB (3.0%) 
           2: cpu: 4.6% command: conky pid: 822 mem: 18.1 MiB (0.5%) 
           3: cpu: 3.2% command: shairport-sync pid: 1275 mem: 3.21 MiB (0.0%) 
           4: cpu: 1.9% command: plank pid: 831 mem: 32.6 MiB (0.9%) 
           5: cpu: 1.8% command: init pid: 1 mem: 7.94 MiB (0.2%) 
           Memory top: 5 
           1: mem: 106.9 MiB (3.0%) command: xorg pid: 500 cpu: 12.0% 
           2: mem: 49.4 MiB (1.4%) command: caja pid: 802 cpu: 1.4% 
           3: mem: 38.3 MiB (1.1%) command: mate-menu pid: 807 cpu: 1.8% 
           4: mem: 35.3 MiB (1.0%) command: mate-terminal pid: 1052 cpu: 1.1% 
           5: mem: 32.6 MiB (0.9%) command: plank pid: 831 cpu: 1.9% 
Info:      Processes: 158 Uptime: 1m Init: systemd v: 241 runlevel: 5 Compilers: gcc: 8.3.0 alt: 8 
           Client: shell wrapper v: 5.0.3-release inxi: 3.1.01

Benchmark #26128 - Brand: SanDisk Extreme Portable