Benchmark #28105 - pibenchmarks.com

Brand: Western Digital Green M.2
SSD (M.2 SATA)
#44 / 1,539
271
#710 / 1,539
#681 / 875
#90 / 112
5,113
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2020-06-26 20:09:43
#28,105
2,004
-3,109 (-155.14%)
Anonymous
WDS1 20G2G0B-00EPW SSD ON Pi 3 using StarTech to USB adapter

Storage Details
Western Digital Green M.2
SSD (M.2 SATA)
120G
SSD
WDC
WDS120G2G0B-00EPW0
M.2
SATA
2.00
480
0424:0578
0x0424 (Microchip Technology, Inc. (formerly SMSC))
0x0578 (JMS578 SATA 6Gb/s)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 3B 1.2
Raspberry Pi 3 Model B Rev 1.2
Raspberry Pi Foundation
1,200
400
450

Operating System

Debian GNU/Linux 10 (buster)
aarch64

Benchmark Results
28.3 MB/s
27.1 MB/s
26.63 MB/s
2,186 IOPS
2,043 IOPS
8,746 KB/s
8,174 KB/s
10,436 KB/s
9,375 KB/s
8,073 KB/s
8,962 KB/s

inxi Results
System: Host: r3 Kernel: 5.4.42-v8+ aarch64 bits: 64 compiler: gcc v: 5.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=Composite-1:720x480@60,margin_left=32,margin_right=32,margin_top=32,margin_bottom=32 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6fe275db-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory Console: N/A Distro: Debian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 Memory: RAM: total: 979.0 MiB used: 141.0 MiB (14.4%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A stepping: 4 microcode: N/A bogomips: 0 Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 195x43 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.42-v8+ Network: Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 chip ID: 0424:ec00 IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::1619:d9db:65bd:c7fb/64 scope: link IF-ID-1: wlan0 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 187.94.X.X Drives: Local Storage: total: 111.80 GiB used: 2.89 GiB (2.6%) ID-1: /dev/sda type: USB vendor: Western Digital model: WDS1 20G2G0B-00EPW0 size: 111.80 GiB block size: physical: 512 B logical: 512 B rev: 0202 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 28.57 GiB size: 28.07 GiB (98.23%) used: 2.83 GiB (10.1%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: rootfs uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.0 MiB (21.0%) fs: vfat block size: 512 B dev: /dev/sda1 label: boot uuid: F8C9-55AB Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 Device-2: 1-1.5:4 info: Intrinsix type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 0578:0578 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian buster main contrib non-free 2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free 3: deb http://deb.debian.org/debian buster-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 119 1: cpu: 9.4% command: [kworker/0:5-events_freezable] pid: 325 mem: 0.00 MiB (0.0%) 2: cpu: 2.2% command: init pid: 1 mem: 9.16 MiB (0.9%) 3: cpu: 0.6% command: [kworker/0:2-events] pid: 85 mem: 0.00 MiB (0.0%) 4: cpu: 0.6% command: [usb-storage] pid: 92 mem: 0.00 MiB (0.0%) 5: cpu: 0.5% command: systemd-udevd pid: 159 mem: 4.77 MiB (0.4%) Memory top: 5 of 119 1: mem: 14.5 MiB (1.5%) command: packagekitd pid: 1016 cpu: 0.1% 2: mem: 14.2 MiB (1.4%) command: systemd-journald pid: 124 cpu: 0.3% 3: mem: 9.16 MiB (0.9%) command: init pid: 1 cpu: 2.2% 4: mem: 8.06 MiB (0.8%) command: systemd pid: 613 cpu: 0.0% 5: mem: 7.91 MiB (0.8%) command: polkitd pid: 1020 cpu: 0.0% Info: Processes: 119 Uptime: 3m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Shell: bash (sudo) v: 5.0.3 inxi: 3.1.03

inxi Results

System:    Host: r3 Kernel: 5.4.42-v8+ aarch64 bits: 64 compiler: gcc v: 5.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 
           snd_bcm2835.enable_headphones=1 
           video=Composite-1:720x480@60,margin_left=32,margin_right=32,margin_top=32,margin_bottom=32 
           vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=6fe275db-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles 
           cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory 
           Console: N/A Distro: Debian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a02082 
Memory:    RAM: total: 979.0 MiB used: 141.0 MiB (14.4%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: N/A variant: cortex-a53 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: N/A 
           stepping: 4 microcode: N/A bogomips: 0 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 4: 1200 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Not affected 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.20.4 driver: modesetting unloaded: fbdev tty: 195x43 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k5.4.42-v8+ 
Network:   Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx bus ID: 1-1.1:3 
           chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: noprefixroute scope: global broadcast: 192.168.X.X 
           IP v6: fe80::1619:d9db:65bd:c7fb/64 scope: link 
           IF-ID-1: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 187.94.X.X 
Drives:    Local Storage: total: 111.80 GiB used: 2.89 GiB (2.6%) 
           ID-1: /dev/sda type: USB vendor: Western Digital model: WDS1 20G2G0B-00EPW0 size: 111.80 GiB block size: 
           physical: 512 B logical: 512 B rev: 0202 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 28.57 GiB size: 28.07 GiB (98.23%) used: 2.83 GiB (10.1%) fs: ext4 block size: 4096 B 
           dev: /dev/sda2 label: rootfs uuid: eae7cc40-f1d2-4bf1-8b9b-ccab61498abe 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 53.0 MiB (21.0%) fs: vfat block size: 512 B 
           dev: /dev/sda1 label: boot uuid: F8C9-55AB 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100.0 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 1-1:2 info: Standard Microsystems SMC9514 Hub ports: 5 rev: 2.0 speed: 480 Mb/s chip ID: 0424:9514 
           Device-1: 1-1.1:3 info: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: Network driver: smsc95xx 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0424:ec00 
           Device-2: 1-1.5:4 info: Intrinsix type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s 
           chip ID: 0578:0578 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 119 
           1: cpu: 9.4% command: [kworker/0:5-events_freezable] pid: 325 mem: 0.00 MiB (0.0%) 
           2: cpu: 2.2% command: init pid: 1 mem: 9.16 MiB (0.9%) 
           3: cpu: 0.6% command: [kworker/0:2-events] pid: 85 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.6% command: [usb-storage] pid: 92 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.5% command: systemd-udevd pid: 159 mem: 4.77 MiB (0.4%) 
           Memory top: 5 of 119 
           1: mem: 14.5 MiB (1.5%) command: packagekitd pid: 1016 cpu: 0.1% 
           2: mem: 14.2 MiB (1.4%) command: systemd-journald pid: 124 cpu: 0.3% 
           3: mem: 9.16 MiB (0.9%) command: init pid: 1 cpu: 2.2% 
           4: mem: 8.06 MiB (0.8%) command: systemd pid: 613 cpu: 0.0% 
           5: mem: 7.91 MiB (0.8%) command: polkitd pid: 1020 cpu: 0.0% 
Info:      Processes: 119 Uptime: 3m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 
           Shell: bash (sudo) v: 5.0.3 inxi: 3.1.03

Benchmark #28105 - Brand: Western Digital Green M.2