Benchmark #42032 - pibenchmarks.com

Brand: Samsung HM500LI
HDD (3.5" SATA)
#1,341 / 1,679
1
#1,445 / 1,679
#63 / 69
#24 / 30
906
	Amazon.com Amazon.ca Amazon.de Amazon.fr Amazon.it

Overview
2021-03-14 20:01:11
#42,032
906
0 (0.00%)
Anonymous
Samsung HM500LI 500GB 5400RPM Startech SATA to R Pi 400 4GB Powered USB Expander

Storage Details
Samsung HM500LI
HDD (3.5" SATA)
500G
HDD
Samsung
HM500LI
SATA
3.00
5,000
2109:a2a4
0x2109
0xa2a4 (External SATA Hard Drive Adapter cable PA023U3)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 400 1.0
Raspberry Pi 400 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,800
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
55.6 MB/s
51.58 MB/s
126.4 MB/s
247 IOPS
215 IOPS
988 KB/s
861 KB/s
8,947 KB/s
11,409 KB/s
408 KB/s
905 KB/s

inxi Results
System: Kernel: 5.10.11-v7l+ armv7l bits: 32 compiler: gcc v: 10.2.1 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=3b629b87-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 Memory: RAM: total: 3.81 GiB used: 453.2 MiB (11.6%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu class ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting unloaded: fbdev display ID: :0.0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9") Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 70 size: 698x393mm (27.5x15.5") diag: 801mm (31.5") Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio class ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi Sound Server: ALSA v: k5.10.11-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Message: No Bluetooth data was found. Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 480.37 GiB used: 7.99 GiB (1.7%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: HM500LI size: 465.76 GiB block size: physical: 4096 B logical: 512 B rev: 4101 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: Cruzer Glide size: 14.61 GiB block size: physical: 512 B logical: 512 B rev: 1.00 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. Partition: ID-1: / raw size: 465.51 GiB size: 457.2 GiB (98.22%) used: 7.41 GiB (1.6%) fs: ext4 block size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 ID-2: /boot raw size: 256 MiB size: 252 MiB (98.46%) used: 47.5 MiB (18.9%) fs: vfat block size: 512 B dev: /dev/sda1 maj-min: 8:1 label: BOOT uuid: 2F50-B4D6 ID-3: /media/pi/0B37-1280 raw size: 14.6 GiB size: 14.58 GiB (99.89%) used: 545.6 MiB (3.7%) fs: vfat block size: 512 B dev: /dev/sdb1 maj-min: 8:17 label: N/A uuid: 0B37-1280 Swap: Kernel: swappiness: 60 (default) cache pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 class ID: 0900 Hub-3: 1-1.1:3 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2812 class ID: 0900 Hub-4: 1-1.1.1:5 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2812 class ID: 0900 Hub-5: 1-1.1.4:7 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:2812 class ID: 0900 Device-1: 1-1.1.X.X:8 info: SanDisk Cruzer Glide type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0781:5575 class ID: 0806 Device-2: 1-1.3:4 info: Pixart Imaging Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 class ID: 0301 Device-3: 1-1.4:6 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0007 class ID: 0300 Hub-6: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 class ID: 0900 Hub-7: 2-1:2 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0812 class ID: 0900 Hub-8: 2-1.1:3 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0812 class ID: 0900 Hub-9: 2-1.4:4 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 2109:0812 class ID: 0900 Device-1: 2-1.4.3:5 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 7825:a2a4 class ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2036 lib: 921 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/vscode.list 1: deb [arch=amd64,arm64,armhf] http: //packages.microsoft.com/repos/code stable main Processes: CPU top: 5 of 165 1: cpu: 7.2% command: xorg pid: 556 mem: 57.7 MiB (1.5%) 2: cpu: 5.8% command: rpi-400-03-14-2010.txt started by: mousepad pid: 920 mem: 49.8 MiB (1.3%) 3: cpu: 3.4% command: init pid: 1 mem: 7.92 MiB (0.2%) 4: cpu: 2.5% command: lxterminal pid: 932 mem: 28.0 MiB (0.7%) 5: cpu: 2.3% command: pcmanfm pid: 698 mem: 25.4 MiB (0.6%) Memory top: 5 of 165 1: mem: 57.7 MiB (1.5%) command: xorg pid: 556 cpu: 7.2% 2: mem: 49.8 MiB (1.3%) command: rpi-400-03-14-2010.txt started by: mousepad pid: 920 cpu: 5.8% 3: mem: 29.2 MiB (0.7%) command: lxpanel pid: 697 cpu: 1.3% 4: mem: 28.6 MiB (0.7%) command: applet.py started by: python3 pid: 745 cpu: 1.1% 5: mem: 28.0 MiB (0.7%) command: lxterminal pid: 932 cpu: 2.5% Info: Processes: 165 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.01

inxi Results

System:    Kernel: 5.10.11-v7l+ armv7l bits: 32 compiler: gcc v: 10.2.1 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=3b629b87-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash 
           plymouth.ignore-serial-consoles 
           Desktop: Openbox 3.6.1 info: lxpanel dm: LightDM 1.26.0 
           Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 
           Memory:    RAM: total: 3.81 GiB used: 453.2 MiB (11.6%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu 
           class ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Display: server: X.Org 1.20.4 compositor: xcompmgr driver: loaded: modesetting 
           unloaded: fbdev display ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 70 size: 698x393mm (27.5x15.5") 
           diag: 801mm (31.5") 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio 
           class ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc class ID: hdmi 
           Sound Server: ALSA v: k5.10.11-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Message: No Bluetooth data was found. 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 480.37 GiB used: 7.99 GiB (1.7%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: HM500LI size: 465.76 GiB 
           block size: physical: 4096 B logical: 512 B rev: 4101 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: Cruzer Glide 
           size: 14.61 GiB block size: physical: 512 B logical: 512 B rev: 1.00 
           scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw size: 465.51 GiB size: 457.2 GiB (98.22%) used: 7.41 GiB (1.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: b2754152-e8ec-4cc4-8898-42b7cc77dd87 
           ID-2: /boot raw size: 256 MiB size: 252 MiB (98.46%) used: 47.5 MiB (18.9%) fs: vfat 
           block size: 512 B dev: /dev/sda1 maj-min: 8:1 label: BOOT uuid: 2F50-B4D6 
           ID-3: /media/pi/0B37-1280 raw size: 14.6 GiB size: 14.58 GiB (99.89%) 
           used: 545.6 MiB (3.7%) fs: vfat block size: 512 B dev: /dev/sdb1 maj-min: 8:17 
           label: N/A uuid: 0B37-1280 
Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 class ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           class ID: 0900 
           Hub-3: 1-1.1:3 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 2109:2812 class ID: 0900 
           Hub-4: 1-1.1.1:5 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 2109:2812 class ID: 0900 
           Hub-5: 1-1.1.4:7 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 speed: 480 Mb/s 
           chip ID: 2109:2812 class ID: 0900 
           Device-1: 1-1.1.X.X:8 info: SanDisk Cruzer Glide type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 2.0 speed: 480 Mb/s chip ID: 0781:5575 class ID: 0806 
           Device-2: 1-1.3:4 info: Pixart Imaging Optical Mouse type: Mouse 
           driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s chip ID: 093a:2510 
           class ID: 0301 
           Device-3: 1-1.4:6 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0007 class ID: 0300 
           Hub-6: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 class ID: 0900 
           Hub-7: 2-1:2 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 2109:0812 class ID: 0900 
           Hub-8: 2-1.1:3 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 2109:0812 class ID: 0900 
           Hub-9: 2-1.4:4 info: VIA Labs VL812 Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 2109:0812 class ID: 0900 
           Device-1: 2-1.4.3:5 info: N/A type: Mass Storage driver: uas interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 7825:a2a4 class ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 2036 lib: 921 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/vscode.list 
           1: deb [arch=amd64,arm64,armhf] http: //packages.microsoft.com/repos/code stable main
Processes: CPU top: 5 of 165 
           1: cpu: 7.2% command: xorg pid: 556 mem: 57.7 MiB (1.5%) 
           2: cpu: 5.8% command: rpi-400-03-14-2010.txt started by: mousepad pid: 920 
           mem: 49.8 MiB (1.3%) 
           3: cpu: 3.4% command: init pid: 1 mem: 7.92 MiB (0.2%) 
           4: cpu: 2.5% command: lxterminal pid: 932 mem: 28.0 MiB (0.7%) 
           5: cpu: 2.3% command: pcmanfm pid: 698 mem: 25.4 MiB (0.6%) 
           Memory top: 5 of 165 
           1: mem: 57.7 MiB (1.5%) command: xorg pid: 556 cpu: 7.2% 
           2: mem: 49.8 MiB (1.3%) command: rpi-400-03-14-2010.txt started by: mousepad pid: 920 
           cpu: 5.8% 
           3: mem: 29.2 MiB (0.7%) command: lxpanel pid: 697 cpu: 1.3% 
           4: mem: 28.6 MiB (0.7%) command: applet.py started by: python3 pid: 745 cpu: 1.1% 
           5: mem: 28.0 MiB (0.7%) command: lxterminal pid: 932 cpu: 2.5% 
Info:      Processes: 165 Uptime: 2m Init: systemd v: 241 runlevel: 5 target: graphical.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.01

Benchmark #42032 - Brand: Samsung HM500LI