Benchmark #42720 - pibenchmarks.com

Brand: Western Digital Red SA500 Series
SSD (2.5" SATA)
#267 / 1,698
60
#576 / 1,698
#553 / 988
#113 / 370
6,677
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-25 14:11:24
#42,720
5,890
-787 (-13.36%)
Anonymous
wdred500sharkoon

Storage Details
Western Digital Red SA500 Series
SSD (2.5" SATA)
500G
SSD
WDC
WDS500G1R0A-68A4W0
2.5 inch
SATA
3.00
5,000
152d:2509
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x2509 (AES2501)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 400 1.0
Raspberry Pi 400 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,800
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
137 MB/s
168.73 MB/s
152.92 MB/s
6,382 IOPS
3,935 IOPS
25,528 KB/s
15,741 KB/s
26,840 KB/s
20,824 KB/s
15,434 KB/s
25,983 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TERMINAL = "iTerm2", LC_CTYPE = "UTF-8", LANG = "de_DE.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("de_DE.UTF-8"). System: Kernel: 5.4.83-v7l+ armv7l bits: 32 compiler: gcc v: 8.4.0 parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=5a65e30b-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 Memory: RAM: total: 3.81 GiB used: 289.1 MiB (7.4%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 1296 Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 4: 1800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 118x47 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.4.83-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6606 hci-v: 5.0 rev: 36 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 465.76 GiB used: 1.33 GiB (0.3%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WDS 500G1R0A-68A4W0 size: 465.76 GiB block-size: physical: 512 B logical: 512 B rev: 0107 scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 465.51 GiB size: 458.26 GiB (98.44%) used: 1.29 GiB (0.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: a7adb26a-8b87-4729-99c8-9f5ac069d51e ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 46.4 MiB (18.4%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: DC3E-E470 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: HP Optical Mouse type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 03f0:134a class-ID: 0301 Device-2: 1-1.4:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: JMicron / JMicron USA JMS539 JMS551 SATA 3Gb/s bridge type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 8mA chip-ID: 152d:2509 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 503 lib: 250 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 of 132 1: cpu: 2.5% command: init pid: 1 mem: 8.07 MiB (0.2%) 2: cpu: 0.3% command: [kworker/0:3-events_power_efficient] pid: 77 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: [irq/40-mmc0] pid: 79 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: [usb-storage] pid: 83 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: bash pid: 910 mem: 2.77 MiB (0.0%) Memory top: 5 of 132 1: mem: 8.07 MiB (0.2%) command: init pid: 1 cpu: 2.5% 2: mem: 7.57 MiB (0.1%) command: systemd-journald pid: 109 cpu: 0.2% 3: mem: 6.46 MiB (0.1%) command: systemd pid: 875 cpu: 0.0% 4: mem: 6.20 MiB (0.1%) command: sshd: pid: 872 cpu: 0.0% 5: mem: 5.71 MiB (0.1%) command: systemd-logind pid: 374 cpu: 0.1% Info: Processes: 132 Uptime: 4m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_TERMINAL = "iTerm2",
	LC_CTYPE = "UTF-8",
	LANG = "de_DE.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("de_DE.UTF-8").
System:    Kernel: 5.4.83-v7l+ armv7l bits: 32 compiler: gcc v: 8.4.0 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 
           video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=5a65e30b-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 
           Memory:    RAM: total: 3.81 GiB used: 289.1 MiB (7.4%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 1296 
           Speed: 1800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 1800 2: 1800 3: 1800 
           4: 1800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: 118x47 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.4.83-v7l+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6606 
           hci-v: 5.0 rev: 36 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 465.76 GiB used: 1.33 GiB (0.3%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital 
           model: WDS 500G1R0A-68A4W0 size: 465.76 GiB block-size: physical: 512 B logical: 512 B 
           rev: 0107 scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 465.51 GiB size: 458.26 GiB (98.44%) used: 1.29 GiB (0.3%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs 
           uuid: a7adb26a-8b87-4729-99c8-9f5ac069d51e 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 46.4 MiB (18.4%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: DC3E-E470 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.3:3 info: HP Optical Mouse type: Mouse driver: hid-generic,usbhid 
           interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 03f0:134a class-ID: 0301 
           Device-2: 1-1.4:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: JMicron / JMicron USA JMS539 JMS551 SATA 3Gb/s bridge 
           type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 8mA 
           chip-ID: 152d:2509 class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 503 lib: 250 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 of 132 
           1: cpu: 2.5% command: init pid: 1 mem: 8.07 MiB (0.2%) 
           2: cpu: 0.3% command: [kworker/0:3-events_power_efficient] pid: 77 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.3% command: [irq/40-mmc0] pid: 79 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: [usb-storage] pid: 83 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: bash pid: 910 mem: 2.77 MiB (0.0%) 
           Memory top: 5 of 132 
           1: mem: 8.07 MiB (0.2%) command: init pid: 1 cpu: 2.5% 
           2: mem: 7.57 MiB (0.1%) command: systemd-journald pid: 109 cpu: 0.2% 
           3: mem: 6.46 MiB (0.1%) command: systemd pid: 875 cpu: 0.0% 
           4: mem: 6.20 MiB (0.1%) command: sshd: pid: 872 cpu: 0.0% 
           5: mem: 5.71 MiB (0.1%) command: systemd-logind pid: 374 cpu: 0.1% 
Info:      Processes: 132 Uptime: 4m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #42720 - Brand: Western Digital Red SA500 Series