Benchmark #42789 - pibenchmarks.com

Brand: PNY CS900
SSD (2.5" SATA)
#35 / 1,539
294
#584 / 1,539
#562 / 875
#178 / 363
5,857
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-03-26 14:10:39
#42,789
7,040
+1,183 (+16.80%)
Anonymous

Storage Details
PNY CS900
SSD (2.5" SATA)
120G
SSD
PNY
CS900120GBSSD
2.5 inch
SATA
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
ARMv7 v7l
4
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
173 MB/s
273.29 MB/s
225.87 MB/s
7,843 IOPS
19,449 IOPS
31,374 KB/s
77,796 KB/s
26,991 KB/s
21,679 KB/s
18,841 KB/s
24,668 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 5.10.11-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=4f00ace4-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 Memory: RAM: total: 3.81 GiB used: 405.1 MiB (10.4%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 720 Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 4: 1000 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 238x28 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.11-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-1: br-35b11f29f687 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: down mac: IP v4: scope: global broadcast: IF-ID-3: veth2477573 state: up speed: 10000 Mbps duplex: full mac: IF-ID-4: veth8fe6c18 state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: wg0 state: unknown speed: N/A duplex: N/A mac: N/A IP v4: scope: global WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 111.79 GiB used: 4.27 GiB (3.8%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: PNY model: CS900 120GB SSD size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: CS900613 temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED cycles: 3 written: 3 KiB Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 111.54 GiB size: 109.28 GiB (97.98%) used: 4.23 GiB (3.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A uuid: 85639cb5-23b2-4c4c-96c1-d1c567c9f024 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.5 MiB (19.2%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 1822-8E7E Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No Unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 587 lib: 261 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/docker.list 1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Active apt repos in: /etc/apt/sources.list.d/vscode.list 1: deb [arch=amd64,arm64,armhf] http: //packages.microsoft.com/repos/code stable main Processes: CPU top: 5 of 142 1: cpu: 0.9% command: init pid: 1 mem: 8.22 MiB (0.2%) 2: cpu: 0.7% command: bash pid: 1552 mem: 2.81 MiB (0.0%) 3: cpu: 0.6% command: [kworker/1:1+events_freezable] pid: 33 mem: 0.00 MiB (0.0%) 4: cpu: 0.5% command: pihole-ftl pid: 698 mem: 5.89 MiB (0.1%) 5: cpu: 0.4% command: dockerd pid: 670 mem: 63.9 MiB (1.6%) Memory top: 5 of 142 1: mem: 63.9 MiB (1.6%) command: dockerd pid: 670 cpu: 0.4% 2: mem: 60.8 MiB (1.5%) command: mysqld pid: 1026 cpu: 0.2% 3: mem: 35.6 MiB (0.9%) command: containerd pid: 576 cpu: 0.1% 4: mem: 25.7 MiB (0.6%) command: apache2 pid: 1033 cpu: 0.0% 5: mem: 16.5 MiB (0.4%) command: php-cgi pid: 651 cpu: 0.0% Info: Processes: 142 Uptime: 7m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_CTYPE = "UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Kernel: 5.10.11-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 
           vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=4f00ace4-02 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2711 rev: c03112 
           Memory:    RAM: total: 3.81 GiB used: 405.1 MiB (10.4%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 720 
           Speed: 1000 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000 3: 1000 
           4: 1000 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: 238x28 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.11-v7l+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: down mac:  
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-1: br-35b11f29f687 state: up speed: 10000 Mbps duplex: unknown mac:  
           IP v4:  scope: global broadcast:  
           IP v6:  scope: link 
           IF-ID-2: docker0 state: down mac:  
           IP v4:  scope: global broadcast:  
           IF-ID-3: veth2477573 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-4: veth8fe6c18 state: up speed: 10000 Mbps duplex: full mac:  
           IF-ID-5: wg0 state: unknown speed: N/A duplex: N/A mac: N/A 
           IP v4:  scope: global 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 
           hci-v: 5.0 rev: 156 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 111.79 GiB used: 4.27 GiB (3.8%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: PNY model: CS900 120GB SSD 
           size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s 
           rotation: SSD rev: CS900613 temp: 33 C scheme: MBR 
           SMART: yes state: enabled health: PASSED cycles: 3 written: 3 KiB 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 111.54 GiB size: 109.28 GiB (97.98%) used: 4.23 GiB (3.9%) fs: ext4 
           block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A 
           uuid: 85639cb5-23b2-4c4c-96c1-d1c567c9f024 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.5 MiB (19.2%) fs: vfat 
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: 1822-8E7E 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap 
Unmounted: Message: No Unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s 
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge 
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa 
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 587 lib: 261 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/docker.list 
           1: deb [arch=armhf] https: //download.docker.com/linux/raspbian buster stable
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           Active apt repos in: /etc/apt/sources.list.d/vscode.list 
           1: deb [arch=amd64,arm64,armhf] http: //packages.microsoft.com/repos/code stable main
Processes: CPU top: 5 of 142 
           1: cpu: 0.9% command: init pid: 1 mem: 8.22 MiB (0.2%) 
           2: cpu: 0.7% command: bash pid: 1552 mem: 2.81 MiB (0.0%) 
           3: cpu: 0.6% command: [kworker/1:1+events_freezable] pid: 33 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.5% command: pihole-ftl pid: 698 mem: 5.89 MiB (0.1%) 
           5: cpu: 0.4% command: dockerd pid: 670 mem: 63.9 MiB (1.6%) 
           Memory top: 5 of 142 
           1: mem: 63.9 MiB (1.6%) command: dockerd pid: 670 cpu: 0.4% 
           2: mem: 60.8 MiB (1.5%) command: mysqld pid: 1026 cpu: 0.2% 
           3: mem: 35.6 MiB (0.9%) command: containerd pid: 576 cpu: 0.1% 
           4: mem: 25.7 MiB (0.6%) command: apache2 pid: 1033 cpu: 0.0% 
           5: mem: 16.5 MiB (0.4%) command: php-cgi pid: 651 cpu: 0.0% 
Info:      Processes: 142 Uptime: 7m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: 
           gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #42789 - Brand: PNY CS900