Benchmark #43609 - pibenchmarks.com

Brand: Western Digital MyBook Portable HDD
SSD (Portable)
#416 / 1,679
27
#1,044 / 1,679
#935 / 984
#133 / 144
2,501
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-04-09 13:25:30
#43,609
3,113
+612 (+19.66%)
Anonymous
[Anot sure

Storage Details
Western Digital MyBook Portable HDD
SSD (Portable)
8001G
SSD
WDC
WD80EDAZ-11TA3A0
SATA
3.00
5,000
1d6b:25ed
0x1d6b (Linux Foundation)
0x25ed
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 400 1.0
Raspberry Pi 400 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,800
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
153 MB/s
185.6 MB/s
221.72 MB/s
1,217 IOPS
1,814 IOPS
4,870 KB/s
7,257 KB/s
21,481 KB/s
18,510 KB/s
5,633 KB/s
7,275 KB/s

inxi Results
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_CTYPE = "UTF-8", LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to a fallback locale ("en_GB.UTF-8"). System: Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=aab568a8-1e89-45f3-96ff-ff37ed6b7e13 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait rootdelay=5 Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 Memory: RAM: total: 3.81 GiB used: 944.9 MiB (24.2%) gpu: 76 MiB RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 bogomips: 576 Speed: 800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: No display server data found. Headless machine? tty: 239x34 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: noprefixroute scope: global broadcast: IP v6: type: dynamic mngtmpaddr noprefixroute scope: global IP v6: scope: link IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A IP v4: scope: global broadcast: IP v6: virtual: stable-privacy scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: ID: hci0 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6606 hci-v: 5.0 rev: 36 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No LVM data was found. RAID: Message: No RAID data was found. Drives: Local Storage: total: 7.34 TiB used: 1.32 TiB (18.0%) ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL64G size: 59.48 GiB block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD My Book 25ED size: 7.28 TiB block-size: physical: 4096 B logical: 512 B rev: 1031 scheme: GPT SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No Optical or Floppy data was found. Partition: ID-1: / raw-size: 9.31 GiB size: 9.1 GiB (97.76%) used: 3.18 GiB (35.0%) fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A uuid: bd06f4f7-ccdb-4db6-8343-44858444880b ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.9 MiB (19.4%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7581-8A48 ID-3: /mnt/storage raw-size: 7.27 TiB size: 7.21 TiB (99.20%) used: 1.32 TiB (18.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A uuid: 97c4c118-4c4b-4053-955b-674418f358e4 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 72.3 MiB (72.3%) priority: -2 file: /var/swap Unmounted: ID-1: /dev/mmcblk0p2 maj-min: 179:2 size: 59.22 GiB fs: ext4 label: rootfs uuid: fa37d505-e741-4d35-bcec-4580aef395e1 USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.4:3 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: Western Digital type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA chip-ID: 1058:25ed class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 593 lib: 274 Active apt repos in: /etc/apt/sources.list 1: deb http: //mirror.kku.ac.th/raspbian/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/nodesource.list 1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_14.x buster main 2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_14.x buster main No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 147 1: cpu: 4.0% command: openvpn pid: 622 mem: 2.91 MiB (0.0%) 2: cpu: 2.8% command: qbittorrent-nox pid: 758 mem: 206.7 MiB (5.4%) 3: cpu: 1.1% command: deluged started by: python pid: 623 mem: 52.3 MiB (1.3%) 4: cpu: 1.0% command: plex pid: 6093 mem: 3.07 MiB (0.0%) 5: cpu: 1.0% command: plex pid: 10221 mem: 37.6 MiB (0.9%) Memory top: 5 of 147 1: mem: 206.7 MiB (5.4%) command: qbittorrent-nox pid: 758 cpu: 2.8% 2: mem: 85.3 MiB (2.2%) command: hb-service pid: 859 cpu: 0.2% 3: mem: 69.4 MiB (1.8%) command: flexget started by: python3 pid: 569 cpu: 0.1% 4: mem: 63.1 MiB (1.6%) command: plex pid: 671 cpu: 0.4% 5: mem: 59.6 MiB (1.5%) command: homebridge pid: 982 cpu: 0.4% Info: Processes: 147 Uptime: 1d 36m Init: systemd v: 241 runlevel: 5 tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

inxi Results

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_CTYPE = "UTF-8",
	LANG = "en_GB.UTF-8"
    are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
System:    Kernel: 5.10.17-v7l+ armv7l bits: 32 compiler: N/A 
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 
           vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 
           root=PARTUUID=aab568a8-1e89-45f3-96ff-ff37ed6b7e13 rootfstype=ext4 elevator=deadline 
           fsck.repair=yes rootwait rootdelay=5 
           Console: tty pts/0 Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 
           Memory:    RAM: total: 3.81 GiB used: 944.9 MiB (24.2%) gpu: 76 MiB 
           RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 bogomips: 576 
           Speed: 800 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu 
           class-ID: gpu 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Display: server: No display server data found. Headless machine? tty: 239x34 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio 
           class-ID: bcm2835_audio 
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.17-v7l+ running: yes 
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fe300000 class-ID: mmcnr 
           IF: wlan0 state: up mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A 
           chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: noprefixroute scope: global broadcast:  
           IP v6:  type: dynamic mngtmpaddr noprefixroute scope: global 
           IP v6:  scope: link 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IP v4:  scope: global broadcast:  
           IP v6:  virtual: stable-privacy scope: link 
           WAN IP:  
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: ID: hci0 state: up address:  bt-v: 3.0 lmp-v: 5.0 sub-v: 6606 
           hci-v: 5.0 rev: 36 
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept 
Logical:   Message: No LVM data was found. 
RAID:      Message: No RAID data was found. 
Drives:    Local Storage: total: 7.34 TiB used: 1.32 TiB (18.0%) 
           ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL64G size: 59.48 GiB 
           block-size: physical: 512 B logical: 512 B rotation: SSD scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WD My Book 25ED 
           size: 7.28 TiB block-size: physical: 4096 B logical: 512 B rev: 1031 
           scheme: GPT 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
           Message: No Optical or Floppy data was found. 
Partition: ID-1: / raw-size: 9.31 GiB size: 9.1 GiB (97.76%) used: 3.18 GiB (35.0%) fs: ext4 
           block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A 
           uuid: bd06f4f7-ccdb-4db6-8343-44858444880b 
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.9 MiB (19.4%) fs: vfat 
           block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: boot uuid: 7581-8A48 
           ID-3: /mnt/storage raw-size: 7.27 TiB size: 7.21 TiB (99.20%) used: 1.32 TiB (18.3%) 
           fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: N/A 
           uuid: 97c4c118-4c4b-4053-955b-674418f358e4 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 100 MiB used: 72.3 MiB (72.3%) priority: -2 
           file: /var/swap 
Unmounted: ID-1: /dev/mmcblk0p2 maj-min: 179:2 size: 59.22 GiB fs: ext4 label: rootfs 
           uuid: fa37d505-e741-4d35-bcec-4580aef395e1 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA 
           chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.4:3 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid 
           interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip-ID: 1d6b:0003 class-ID: 0900 
           Device-1: 2-1:2 info: Western Digital type: Mass Storage driver: usb-storage 
           interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA chip-ID: 1058:25ed class-ID: 0806 
           Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 593 lib: 274 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirror.kku.ac.th/raspbian/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_14.x buster main
           2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_14.x buster main
           No active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list 
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list 
Processes: CPU top: 5 of 147 
           1: cpu: 4.0% command: openvpn pid: 622 mem: 2.91 MiB (0.0%) 
           2: cpu: 2.8% command: qbittorrent-nox pid: 758 mem: 206.7 MiB (5.4%) 
           3: cpu: 1.1% command: deluged started by: python pid: 623 mem: 52.3 MiB (1.3%) 
           4: cpu: 1.0% command: plex pid: 6093 mem: 3.07 MiB (0.0%) 
           5: cpu: 1.0% command: plex pid: 10221 mem: 37.6 MiB (0.9%) 
           Memory top: 5 of 147 
           1: mem: 206.7 MiB (5.4%) command: qbittorrent-nox pid: 758 cpu: 2.8% 
           2: mem: 85.3 MiB (2.2%) command: hb-service pid: 859 cpu: 0.2% 
           3: mem: 69.4 MiB (1.8%) command: flexget started by: python3 pid: 569 cpu: 0.1% 
           4: mem: 63.1 MiB (1.6%) command: plex pid: 671 cpu: 0.4% 
           5: mem: 59.6 MiB (1.5%) command: homebridge pid: 982 cpu: 0.4% 
Info:      Processes: 147 Uptime: 1d 36m Init: systemd v: 241 runlevel: 5 tool: systemctl 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.03

Benchmark #43609 - Brand: Western Digital MyBook Portable HDD