Benchmark #46817 - pibenchmarks.com

Brand: Transcend MTS Series
SSD (M.2 SATA)
#45 / 1,539
257
#200 / 1,539
#192 / 875
#9 / 112
8,542
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-06-19 06:10:35
#46,817
2,999
-5,543 (-184.83%)
nevtag
Transcend TS120GMTS420S on Pi 4 with StarTech SATA to USB adapter

Storage Details
Transcend MTS Series
SSD (M.2 SATA)
120G
SSD
Transcend
TS120GMTS420S
M.2
SATA
2.10
480
045b:0229
0x045b (Hitachi, Ltd)
0x0229
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
1,500
500
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
27.3 MB/s
32.87 MB/s
33.07 MB/s
4,455 IOPS
4,503 IOPS
17,820 KB/s
18,012 KB/s
15,539 KB/s
12,409 KB/s
12,126 KB/s
13,329 KB/s

inxi Results
System: Host: rpi4-20210413 Kernel: 5.10.0-7-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 parameters: video=HDMI-A-1:1360x768M@60 dma.dmachans=0x37f5 bcm2709.boardrev=0xb03114 bcm2709.serial=0xb3c0dec5 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait Console: tty 1 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 1.8 GiB used: 239.3 MiB (13.0%) RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 170x48 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Sound Server-1: ALSA v: k5.10.0-7-arm64 running: yes Network: Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X IP v6: fd00::dea6:32ff:fed2:d709/64 type: dynamic mngtmpaddr scope: global IP v6: fd4b:9ecb:3857:0:dea6:32ff:fed2:d709/64 type: dynamic mngtmpaddr scope: global IP v6: fe80::dea6:32ff:fed2:d709/64 scope: link Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq Device-3: Ralink RT5370 Wireless Adapter type: USB driver: rt2800usb bus-ID: 1-1.2:4 chip-ID: 148f:5370 class-ID: 0000 1.0 IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-1: wlan1 state: down mac: XX:XX:XX:XX:XX:XX WAN IP: 84.60.X.X Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: not found rfk-block: hardware: no software: no address: see --recommends Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial Report: This feature requires one of these tools: hciconfig/bt-adapter Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 2.95 GiB (2.6%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Transcend model: TS120GMTS420S family: based SSDs size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: R052 temp: 52 C scheme: MBR SMART: yes state: enabled health: PASSED on: 35 hrs cycles: 1494 read: 25.34 GiB written: 81.59 GiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.5 GiB size: 111.44 GiB (99.95%) used: 2.83 GiB (2.5%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 67714a03-7cde-4f72-94ad-daf4a4d06359 ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.3 MiB (42.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 659C-8598 Swap: Alert: No swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.1:3 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: uas interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 045b:0229 class-ID: 0806 Device-2: 1-1.2:4 info: Ralink RT5370 Wireless Adapter type: Network driver: rt2800usb interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 450mA chip-ID: 148f:5370 class-ID: 0000 1.0 Device-3: 1-1.4:5 info: Maxxter Telink Wireless Receiver type: Mouse,Keyboard driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 50mA chip-ID: 248a:8367 class-ID: 0301 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 311 lib: 178 Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bullseye main contrib non-free Processes: CPU top: 5 of 107 1: cpu: 1.4% command: init pid: 1 mem: 9.96 MiB (0.5%) 2: cpu: 0.7% command: [kworker/3:2-events] pid: 134 mem: 0.00 MiB (0.0%) 3: cpu: 0.3% command: [irq/27-mmc1] pid: 131 mem: 0.00 MiB (0.0%) 4: cpu: 0.3% command: [kworker/u8:0-ext4-rsv-conversion] pid: 3234 mem: 0.00 MiB (0.0%) 5: cpu: 0.3% command: smartd pid: 4442 mem: 5.20 MiB (0.2%) Memory top: 5 of 107 1: mem: 13.9 MiB (0.7%) command: systemd-journald pid: 213 cpu: 0.1% 2: mem: 9.96 MiB (0.5%) command: init pid: 1 cpu: 1.4% 3: mem: 7.96 MiB (0.4%) command: systemd pid: 712 cpu: 0.0% 4: mem: 6.44 MiB (0.3%) command: sshd started by: sshd: pid: 703 cpu: 0.0% 5: mem: 6.39 MiB (0.3%) command: systemd-logind pid: 432 cpu: 0.0% Info: Processes: 107 Uptime: 10m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Shell: Bash v: 5.1.4 running-in: tty 1 inxi: 3.3.04

inxi Results

System:    Host: rpi4-20210413 Kernel: 5.10.0-7-arm64 aarch64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: video=HDMI-A-1:1360x768M@60 dma.dmachans=0x37f5 bcm2709.boardrev=0xb03114 bcm2709.serial=0xb3c0dec5 
           bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 
           console=ttyS1,115200 root=/dev/sda2 rw fsck.repair=yes net.ifnames=0 rootwait 
           Console: tty 1 Distro: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: N/A 
Battery:   Message: No system battery data found. Is one present? 
Memory:    RAM: total: 1.8 GiB used: 239.3 MiB (13.0%) 
           RAM Report: smbios: No SMBIOS data for dmidecode to process 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 
           bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 
           Features: asimd cpuid crc32 evtstrm fp 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 status: Vulnerable 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu 
           Display: server: No display server data found. Headless machine? tty: 170x48 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi 
           Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi 
           Sound Server-1: ALSA v: k5.10.0-7-arm64 running: yes 
Network:   Device-1: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX 
           IP v4: 192.168.X.X/24 type: dynamic scope: global broadcast: 192.168.X.X 
           IP v6: fd00::dea6:32ff:fed2:d709/64 type: dynamic mngtmpaddr scope: global 
           IP v6: fd4b:9ecb:3857:0:dea6:32ff:fed2:d709/64 type: dynamic mngtmpaddr scope: global 
           IP v6: fe80::dea6:32ff:fed2:d709/64 scope: link 
           Device-2: mmc-pwrseq-simple driver: pwrseq_simple v: N/A port: N/A bus-ID: N/A 
           chip-ID: mmc-pwrseq-simple:wifi-pwrseq class-ID: wifi-pwrseq 
           Device-3: Ralink RT5370 Wireless Adapter type: USB driver: rt2800usb bus-ID: 1-1.2:4 chip-ID: 148f:5370 
           class-ID: 0000 1.0 
           IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX 
           IF-ID-1: wlan1 state: down mac: XX:XX:XX:XX:XX:XX 
           WAN IP: 84.60.X.X 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial 
           Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: not found rfk-block: hardware: no software: no 
           address: see --recommends 
           Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0 class-ID: serial 
           Report: This feature requires one of these tools: hciconfig/bt-adapter 
Logical:   Message: No logical block device data found. 
RAID:      Message: No RAID data found. 
Drives:    Local Storage: total: 111.79 GiB used: 2.95 GiB (2.6%) 
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Transcend model: TS120GMTS420S family: based SSDs size: 111.79 GiB 
           block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s rotation: SSD rev: R052 
           temp: 52 C scheme: MBR 
           SMART: yes state: enabled health: PASSED on: 35 hrs cycles: 1494 read: 25.34 GiB written: 81.59 GiB 
           Message: No optical or floppy data found. 
Partition: ID-1: / raw-size: 111.5 GiB size: 111.44 GiB (99.95%) used: 2.83 GiB (2.5%) fs: ext4 block-size: 4096 B 
           dev: /dev/sda2 maj-min: 8:2 label: RASPIROOT uuid: 67714a03-7cde-4f72-94ad-daf4a4d06359 
           ID-2: /boot/firmware raw-size: 296 MiB size: 295.8 MiB (99.93%) used: 126.3 MiB (42.7%) fs: vfat block-size: 512 B 
           dev: /dev/sda1 maj-min: 8:1 label: RASPIFIRM uuid: 659C-8598 
Swap:      Alert: No swap data was found. 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 
           Device-1: 1-1.1:3 info: Hitachi mSATA Adapter [renkforce Pi-102] type: Mass Storage driver: uas interfaces: 1 
           rev: 2.1 speed: 480 Mb/s power: 2mA chip-ID: 045b:0229 class-ID: 0806            Device-2: 1-1.2:4 info: Ralink RT5370 Wireless Adapter type: Network driver: rt2800usb interfaces: 1 rev: 2.0 
           speed: 480 Mb/s power: 450mA chip-ID: 148f:5370 class-ID: 0000 1.0 
           Device-3: 1-1.4:5 info: Maxxter Telink Wireless Receiver type: Mouse,Keyboard driver: hid-generic,usbhid 
           interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 50mA chip-ID: 248a:8367 class-ID: 0301 
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Packages: apt: 311 lib: 178 
           Active apt repos in: /etc/apt/sources.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
Processes: CPU top: 5 of 107 
           1: cpu: 1.4% command: init pid: 1 mem: 9.96 MiB (0.5%) 
           2: cpu: 0.7% command: [kworker/3:2-events] pid: 134 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.3% command: [irq/27-mmc1] pid: 131 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.3% command: [kworker/u8:0-ext4-rsv-conversion] pid: 3234 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.3% command: smartd pid: 4442 mem: 5.20 MiB (0.2%) 
           Memory top: 5 of 107 
           1: mem: 13.9 MiB (0.7%) command: systemd-journald pid: 213 cpu: 0.1% 
           2: mem: 9.96 MiB (0.5%) command: init pid: 1 cpu: 1.4% 
           3: mem: 7.96 MiB (0.4%) command: systemd pid: 712 cpu: 0.0% 
           4: mem: 6.44 MiB (0.3%) command: sshd started by: sshd: pid: 703 cpu: 0.0% 
           5: mem: 6.39 MiB (0.3%) command: systemd-logind pid: 432 cpu: 0.0% 
Info:      Processes: 107 Uptime: 10m Init: systemd v: 247 runlevel: 5 tool: systemctl Compilers: gcc: N/A Shell: Bash 
           v: 5.1.4 running-in: tty 1 inxi: 3.3.04

Benchmark #46817 - Brand: Transcend MTS Series