Benchmark #51280 - pibenchmarks.com

Brand: PNY CS900
SSD (2.5" SATA)
#35 / 1,539
294
#584 / 1,539
#562 / 875
#178 / 363
5,857
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2021-10-14 12:37:01
#51,280
7,909
+2,052 (+25.95%)
Anonymous

Storage Details
PNY CS900
SSD (2.5" SATA)
120G
SSD
PNY
CS900120GBSSD
2.5 inch
SATA
3.00
5,000
1d6b:55aa
0x1d6b (Linux Foundation)
0x55aa (ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.4
Raspberry Pi 4 Model B Rev 1.4
Raspberry Pi Foundation
N/A
4
2,147 (+647)
750 (+250)
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
aarch64

Benchmark Results
134 MB/s
281.46 MB/s
238.03 MB/s
14,948 IOPS
24,585 IOPS
59,795 KB/s
98,343 KB/s
27,906 KB/s
24,435 KB/s
17,114 KB/s
28,508 KB/s

inxi Results
System: Kernel: 5.10.63-v8+ aarch64 bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=39d3933c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles ip=192.168.X.X Console: pty pts/0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 7.69 GiB used: 260.3 MiB (3.3%) gpu: 16 MiB RAM Report: no-data: dmidecode is not allowed to read /dev/mem PCI Slots: ARM: No ARM data found for this feature. CPU: Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 bogomips: 432 Speed: 2200 MHz min/max: 600/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200 4: 2200 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 61x36 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi Sound Server-1: ALSA v: k5.10.63-v8+ running: yes Sound Server-2: JACK v: 1.9.12 running: no Sound Server-3: PulseAudio v: 12.2 running: no Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 111.79 GiB used: 8.41 GiB (7.5%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: PNY model: CS900 120GB SSD size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s type: SSD rev: CS900612 temp: 33 C scheme: MBR SMART: yes state: enabled health: PASSED on: 2y 24d 5h cycles: 923 written: 307 KiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 111.54 GiB size: 109.75 GiB (98.40%) used: 8.37 GiB (7.6%) fs: ext4 block-size: 512 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: 075b0d0c-7b1e-4855-9547-125591698723 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: B05C-D0C4 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: 2065 apt: 2061 lib: 944 snap: 4 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main No active apt repos in: /etc/apt/sources.list.d/vscode.list Processes: CPU top: 5 of 142 1: cpu: 13.9% command: snapd pid: 1066 mem: 29.6 MiB (0.3%) 2: cpu: 2.5% command: init pid: 1 mem: 8.48 MiB (0.1%) 3: cpu: 0.3% command: dbus-daemon pid: 351 mem: 3.64 MiB (0.0%) 4: cpu: 0.2% command: [kworker/1:1-events_freezable] pid: 46 mem: 0.00 MiB (0.0%) 5: cpu: 0.2% command: [irq/32-mmc0] pid: 88 mem: 0.00 MiB (0.0%) Memory top: 5 of 142 1: mem: 29.6 MiB (0.3%) command: snapd pid: 1066 cpu: 13.9% 2: mem: 12.9 MiB (0.1%) command: packagekitd pid: 832 cpu: 0.0% 3: mem: 11.7 MiB (0.1%) command: udisksd pid: 350 cpu: 0.1% 4: mem: 10.8 MiB (0.1%) command: vncserver-x11-core pid: 483 cpu: 0.0% 5: mem: 8.57 MiB (0.1%) command: cups-browsed pid: 464 cpu: 0.0% Info: Processes: 142 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.3.07

inxi Results

System:    Kernel: 5.10.63-v8+ aarch64 bits: 32 compiler: N/A
           parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0
           snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=39d3933c-02
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash
           plymouth.ignore-serial-consoles ip=192.168.X.X
           Console: pty pts/0 DM: LightDM 1.26.0 Distro: Raspbian GNU/Linux 10 (buster)
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835 rev: d03114
           Battery:   Message: No system battery data found. Is one present?
Memory:    RAM: total: 7.69 GiB used: 260.3 MiB (3.3%) gpu: 16 MiB
           RAM Report: no-data: dmidecode is not allowed to read /dev/mem
PCI Slots: ARM: No ARM data found for this feature.
CPU:       Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8
           model-id: 0 stepping: 3 bogomips: 432
           Speed: 2200 MHz min/max: 600/2200 MHz Core speeds (MHz): 1: 2200 2: 2200 3: 2200
           4: 2200
           Features: asimd cpuid crc32 evtstrm fp
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: spec_store_bypass status: Vulnerable
           Type: spectre_v1 mitigation: __user pointer sanitization
           Type: spectre_v2 status: Vulnerable
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
           class-ID: gpu
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Display: server: X.org 1.20.4 driver: loaded: fbdev unloaded: modesetting tty: 61x36
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
           class-ID: bcm2835_audio
           Device-2: bcm2711-hdmi0 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Device-3: bcm2711-hdmi1 driver: N/A bus-ID: N/A chip-ID: brcm:soc class-ID: hdmi
           Sound Server-1: ALSA v: k5.10.63-v8+ running: yes
           Sound Server-2: JACK v: 1.9.12 running: no
           Sound Server-3: PulseAudio v: 12.2 running: no
Network:   Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fe300000 class-ID: mmcnr
           IF: wlan0 state: down mac: 
           Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
           chip-ID: brcm:fd580000 class-ID: ethernet
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
           IP v4:  type: dynamic scope: global broadcast: 
           IP v6:  scope: link
           WAN IP: 
Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
           sub-v: 6119 hci-v: 5.0 rev: 156
           Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:   Message: No logical block device data found.
RAID:      Message: No RAID data found.
Drives:    Local Storage: total: 111.79 GiB used: 8.41 GiB (7.5%)
           ID-1: /dev/sda maj-min: 8:0 type: USB vendor: PNY model: CS900 120GB SSD
           size: 111.79 GiB block-size: physical: 512 B logical: 512 B sata: 3.2 speed: 6.0 Gb/s
           type: SSD rev: CS900612 temp: 33 C scheme: MBR
           SMART: yes state: enabled health: PASSED on: 2y 24d 5h cycles: 923 written: 307 KiB
           Message: No optical or floppy data found.
Partition: ID-1: / raw-size: 111.54 GiB size: 109.75 GiB (98.40%) used: 8.37 GiB (7.6%) fs: ext4
           block-size: 512 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
           uuid: 075b0d0c-7b1e-4855-9547-125591698723
           ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 48.1 MiB (19.1%) fs: vfat
           block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: B05C-D0C4
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
           ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted: Message: No unmounted partitions found.
USB:       Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s
           chip-ID: 1d6b:0002 class-ID: 0900
           Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
           chip-ID: 2109:3431 class-ID: 0900
           Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
           chip-ID: 1d6b:0003 class-ID: 0900
           Device-1: 2-2:2 info: ASMedia Name: ASM1051E SATA 6Gb/s bridge ASM1053E SATA 6Gb/s
           bridge ASM1153 SATA 3Gb/s bridge ASM1153E SATA 6Gb/s bridge
           type: Mass Storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s chip-ID: 174c:55aa
           class-ID: 0806 Sensors:   Missing: Required tool sensors not installed. Check --recommends
Repos:     Packages: 2065 apt: 2061 lib: 944 snap: 4
           Active apt repos in: /etc/apt/sources.list
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list
           1: deb http: //archive.raspberrypi.org/debian/ buster main
           No active apt repos in: /etc/apt/sources.list.d/vscode.list
Processes: CPU top: 5 of 142
           1: cpu: 13.9% command: snapd pid: 1066 mem: 29.6 MiB (0.3%)
           2: cpu: 2.5% command: init pid: 1 mem: 8.48 MiB (0.1%)
           3: cpu: 0.3% command: dbus-daemon pid: 351 mem: 3.64 MiB (0.0%)
           4: cpu: 0.2% command: [kworker/1:1-events_freezable] pid: 46 mem: 0.00 MiB (0.0%)
           5: cpu: 0.2% command: [irq/32-mmc0] pid: 88 mem: 0.00 MiB (0.0%)
           Memory top: 5 of 142
           1: mem: 29.6 MiB (0.3%) command: snapd pid: 1066 cpu: 13.9%
           2: mem: 12.9 MiB (0.1%) command: packagekitd pid: 832 cpu: 0.0%
           3: mem: 11.7 MiB (0.1%) command: udisksd pid: 350 cpu: 0.1%
           4: mem: 10.8 MiB (0.1%) command: vncserver-x11-core pid: 483 cpu: 0.0%
           5: mem: 8.57 MiB (0.1%) command: cups-browsed pid: 464 cpu: 0.0%
Info:      Processes: 142 Uptime: 4m Init: systemd v: 241 runlevel: 5 target: graphical.target
           tool: systemctl Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release
           inxi: 3.3.07

Benchmark #51280 - Brand: PNY CS900