Benchmark #5571 - pibenchmarks.com

Brand: SanDisk Extreme Portable
SSD (Portable)
#41 / 1,539
273
#321 / 1,539
#307 / 875
#54 / 137
7,295
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-22 17:13:36
#5,571
5,456
-1,839 (-33.71%)
Anonymous
SanDisk Extreme Pro 512GB

Storage Details
SanDisk Extreme Portable
SSD (Portable)
465.7G
SSD
SanDisk
ExtremeSSD
0781:55a8
0x0781 (SanDisk Corp.)
0x55a8
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Raspbian GNU/Linux 10 (buster)
armv7l

Benchmark Results
165 MB/s
261.97 MB/s
263.99 MB/s
8,025 IOPS
19,541 IOPS
32,100 KB/s
78,167 KB/s
10,963 KB/s
16,242 KB/s
10,921 KB/s
14,734 KB/s

inxi Results
System: Host: piserver Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Memory: RAM: total: 3.88 GiB used: 141.9 MiB (3.6%) gpu: 16.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 113x27 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k4.19.75-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: IF-ID-2: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link WAN IP: Drives: Local Storage: total: 495.57 GiB used: 1.56 GiB (0.3%) ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme SSD size: 465.76 GiB block size: physical: 512 B logical: 512 B scheme: GPT Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.73 GiB size: 457.42 GiB (98.22%) used: 1.51 GiB (0.3%) fs: ext4 block size: 4096 B dev: /dev/sda1 label: N/A uuid: c74c7da0-25c8-4d39-9d67-b800d41d7307 ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.7 MiB (20.9%) fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 Unmounted: ID-1: /dev/mmcblk0p2 size: 29.56 GiB fs: ext4 label: rootfs uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: SanDisk type: Mass Storage driver: uas interfaces: 1 rev: 3.2 speed: 5 Gb/s chip ID: 0781:55a8 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ buster main Processes: CPU top: 5 1: cpu: 2.4% command: init pid: 1 mem: 7.70 MiB (0.1%) 2: cpu: 0.7% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 3: cpu: 0.7% command: [ext4lazyinit] pid: 139 mem: 0.00 MiB (0.0%) 4: cpu: 0.6% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 672 mem: 0.00 MiB (0.0%) 5: cpu: 0.4% command: [irq/39-mmc1] pid: 72 mem: 0.00 MiB (0.0%) Memory top: 5 1: mem: 7.70 MiB (0.1%) command: init pid: 1 cpu: 2.4% 2: mem: 6.74 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.4% 3: mem: 6.61 MiB (0.1%) command: systemd pid: 639 cpu: 0.0% 4: mem: 6.05 MiB (0.1%) command: sshd: pid: 632 cpu: 0.1% 5: mem: 5.52 MiB (0.1%) command: systemd-logind pid: 327 cpu: 0.1% Info: Processes: 122 Uptime: 2m Init: systemd v: 241 runlevel: 3 target: multi-user.target Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

inxi Results

System:    Host: piserver Kernel: 4.19.75-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M 
           smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3f000000 
           vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=/dev/sda1 
           rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait 
           Console: tty 0 dm: N/A Distro: Raspbian GNU/Linux 10 (buster) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 
           Memory:    RAM: total: 3.88 GiB used: 141.9 MiB (3.6%) gpu: 16.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 1080 
           Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 
           4: 1500 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 113x27 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.19.75-v7l+ 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: down mac:  
           IF-ID-2: wlan0 state: up mac:  
           IP v4:  type: dynamic noprefixroute scope: global broadcast:  
           IP v6:  scope: link 
           WAN IP:  
Drives:    Local Storage: total: 495.57 GiB used: 1.56 GiB (0.3%) 
           ID-1: /dev/mmcblk0 model: EB1QT size: 29.81 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB vendor: SanDisk model: Extreme SSD size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B scheme: GPT 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.73 GiB size: 457.42 GiB (98.22%) used: 1.51 GiB (0.3%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: N/A uuid: c74c7da0-25c8-4d39-9d67-b800d41d7307 
           ID-2: /boot raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 52.7 MiB (20.9%) 
           fs: vfat block size: 512 B dev: /dev/mmcblk0p1 label: boot uuid: 5203-DB74 
Unmounted: ID-1: /dev/mmcblk0p2 size: 29.56 GiB fs: ext4 label: rootfs 
           uuid: 2ab3f8e1-7dc6-43f5-b0db-dd5759d51d4e 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: SanDisk type: Mass Storage driver: uas interfaces: 1 rev: 3.2 
           speed: 5 Gb/s chip ID: 0781:55a8 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //raspbian.raspberrypi.org/raspbian/ buster main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http: //archive.raspberrypi.org/debian/ buster main
Processes: CPU top: 5 
           1: cpu: 2.4% command: init pid: 1 mem: 7.70 MiB (0.1%) 
           2: cpu: 0.7% command: [kworker/u8:0-events_unbound] pid: 7 mem: 0.00 MiB (0.0%) 
           3: cpu: 0.7% command: [ext4lazyinit] pid: 139 mem: 0.00 MiB (0.0%) 
           4: cpu: 0.6% command: [kworker/u8:3-brcmf_wq/mmc1:0001:1] pid: 672 mem: 0.00 MiB (0.0%) 
           5: cpu: 0.4% command: [irq/39-mmc1] pid: 72 mem: 0.00 MiB (0.0%) 
           Memory top: 5 
           1: mem: 7.70 MiB (0.1%) command: init pid: 1 cpu: 2.4% 
           2: mem: 6.74 MiB (0.1%) command: systemd-journald pid: 110 cpu: 0.4% 
           3: mem: 6.61 MiB (0.1%) command: systemd pid: 639 cpu: 0.0% 
           4: mem: 6.05 MiB (0.1%) command: sshd: pid: 632 cpu: 0.1% 
           5: mem: 5.52 MiB (0.1%) command: systemd-logind pid: 327 cpu: 0.1% 
Info:      Processes: 122 Uptime: 2m Init: systemd v: 241 runlevel: 3 target: multi-user.target 
           Compilers: gcc: 8.3.0 alt: 8 Client: shell wrapper v: 5.0.3-release inxi: 3.0.37

Benchmark #5571 - Brand: SanDisk Extreme Portable