Benchmark #5614 - pibenchmarks.com

Brand: Seagate Barracuda
HDD (3.5" SATA)
#132 / 1,539
83
#1,094 / 1,539
#47 / 66
#19 / 30
1,332
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2019-12-23 19:05:42
#5,614
1,187
-145 (-12.22%)
Anonymous
Samsung 500G HDD on Pi 4 using StarTech SATA to USB adapter

Storage Details
Seagate Barracuda
HDD (3.5" SATA)
500G
HDD
Seagate
ST9500325AS
Serial
5,400
3.00
5,000
2537:1068
0x2537 (Norelsys)
0x1068 (ValueOpt White)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
1,500
500
1,600

Operating System

Ubuntu 18.04.3 LTS
armv7l

Benchmark Results
65.3 MB/s
74.95 MB/s
58.72 MB/s
296 IOPS
128 IOPS
1,185 KB/s
512 KB/s
17,777 KB/s
17,559 KB/s
495 KB/s
1,137 KB/s

inxi Results
System: Host: pi-new Kernel: 4.19.67-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=2 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 rootwait rootflags=noload net.ifnames=0 Console: tty 0 dm: N/A Distro: Ubuntu 18.04.3 LTS (Bionic Beaver) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 Memory: RAM: total: 1001.0 MiB used: 436.9 MiB (43.6%) gpu: 76.0 MiB RAM Report: unknown-error: dmidecode was unable to generate data PCI Slots: ARM: No ARM data found for this feature. CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: No CPU vulnerability/bugs data available. Graphics: Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Display: server: No display server data found. Headless machine? tty: 90x25 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic scope: global broadcast: WAN IP: Drives: Local Storage: total: 495.48 GiB used: 6.25 GiB (1.3%) ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B logical: 512 B scheme: MBR ID-2: /dev/sda type: USB model: ATA ST9500325AS size: 465.76 GiB block size: physical: 512 B logical: 512 B rev: LVM1 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / raw size: 465.51 GiB size: 458.50 GiB (98.49%) used: 6.21 GiB (1.4%) fs: ext4 block size: 4096 B dev: /dev/sda2 label: writable uuid: 5b958db6-059c-452e-87a8-a172084964b5 ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) used: 39.1 MiB (15.5%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot uuid: DC85-8186 Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: DC85-8186 ID-2: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: writable uuid: 5b958db6-059c-452e-87a8-a172084964b5 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Device-1: 2-2:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 2537:1068 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Active apt repos in: /etc/apt/sources.list 1: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic main restricted 2: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-updates main restricted 3: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic universe 4: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-updates universe 5: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic multiverse 6: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-updates multiverse 7: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-backports main restricted universe multiverse 8: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-security main restricted 9: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-security universe 10: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-security multiverse Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main Processes: CPU top: 5 1: cpu: 1.1% command: arku started by: node pid: 566 mem: 48.6 MiB (5.2%) 2: cpu: 1.1% command: ddns-plus started by: node pid: 573 mem: 51.6 MiB (5.5%) 3: cpu: 0.6% command: pm2 pid: 555 mem: 37.9 MiB (4.0%) 4: cpu: 0.5% command: app started by: node pid: 587 mem: 34.9 MiB (3.7%) 5: cpu: 0.4% command: init pid: 1 mem: 5.92 MiB (0.6%) Memory top: 5 1: mem: 155.4 MiB (16.8%) command: mysqld pid: 521 cpu: 0.2% 2: mem: 51.6 MiB (5.5%) command: ddns-plus started by: node pid: 573 cpu: 1.1% 3: mem: 48.6 MiB (5.2%) command: arku started by: node pid: 566 cpu: 1.1% 4: mem: 37.9 MiB (4.0%) command: pm2 pid: 555 cpu: 0.6% 5: mem: 35.4 MiB (3.8%) command: www started by: node pid: 580 cpu: 0.4% Info: Processes: 117 Uptime: 13m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

inxi Results

System:    Host: pi-new Kernel: 4.19.67-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           parameters: coherent_pool=1M 8250.nr_uarts=0 cma=64M bcm2708_fb.fbwidth=0 
           bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX 
           vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=2 
           console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 
           rootwait rootflags=noload net.ifnames=0 
           Console: tty 0 dm: N/A Distro: Ubuntu 18.04.3 LTS (Bionic Beaver) 
Machine:   Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: a03111 
           Memory:    RAM: total: 1001.0 MiB used: 436.9 MiB (43.6%) gpu: 76.0 MiB 
           RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l 
           family: 7 model-id: N/A stepping: 3 microcode: N/A bogomips: 432 
           Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
           Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:  Device-1: bcm2708-fb driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
           Display: server: No display server data found. Headless machine? tty: 90x25 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: bcm2835-audio driver: N/A bus ID: N/A chip ID: brcm:soc 
           Device-2: bcm2835-hdmi driver: N/A bus ID: N/A chip ID: brcm:soc 
Network:   Message: No ARM data found for this feature. 
           IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac:  
           IP v4:  type: dynamic scope: global broadcast:  
           WAN IP:  
Drives:    Local Storage: total: 495.48 GiB used: 6.25 GiB (1.3%) 
           ID-1: /dev/mmcblk0 model: SC32G size: 29.72 GiB block size: physical: 512 B 
           logical: 512 B scheme: MBR 
           ID-2: /dev/sda type: USB model: ATA ST9500325AS size: 465.76 GiB block size: 
           physical: 512 B logical: 512 B rev: LVM1 scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 465.51 GiB size: 458.50 GiB (98.49%) used: 6.21 GiB (1.4%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: writable 
           uuid: 5b958db6-059c-452e-87a8-a172084964b5 
           ID-2: /boot/firmware raw size: 256.0 MiB size: 252.0 MiB (98.46%) 
           used: 39.1 MiB (15.5%) fs: vfat block size: 512 B dev: /dev/sda1 label: system-boot 
           uuid: DC85-8186 
Unmounted: ID-1: /dev/mmcblk0p1 size: 256.0 MiB fs: vfat label: system-boot uuid: DC85-8186 
           ID-2: /dev/mmcblk0p2 size: 29.47 GiB fs: ext4 label: writable 
           uuid: 5b958db6-059c-452e-87a8-a172084964b5 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
           Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
           chip ID: 1d6b:0003 
           Device-1: 2-2:2 info: N/A type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.0 
           speed: 5 Gb/s chip ID: 2537:1068 Hub: 3-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s 
           chip ID: 1d6b:0002 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic main restricted
           2: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-updates main restricted
           3: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic universe
           4: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-updates universe
           5: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic multiverse
           6: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-updates multiverse
           7: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-backports main restricted universe multiverse
           8: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-security main restricted
           9: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-security universe
           10: deb http: //mirrors.ustc.edu.cn/ubuntu-ports bionic-security multiverse
           Active apt repos in: /etc/apt/sources.list.d/ubuntu-raspi2-ubuntu-ppa-bionic.list 
           1: deb http: //ppa.launchpad.net/ubuntu-raspi2/ppa/ubuntu bionic main
Processes: CPU top: 5 
           1: cpu: 1.1% command: arku started by: node pid: 566 mem: 48.6 MiB (5.2%) 
           2: cpu: 1.1% command: ddns-plus started by: node pid: 573 mem: 51.6 MiB (5.5%) 
           3: cpu: 0.6% command: pm2 pid: 555 mem: 37.9 MiB (4.0%) 
           4: cpu: 0.5% command: app started by: node pid: 587 mem: 34.9 MiB (3.7%) 
           5: cpu: 0.4% command: init pid: 1 mem: 5.92 MiB (0.6%) 
           Memory top: 5 
           1: mem: 155.4 MiB (16.8%) command: mysqld pid: 521 cpu: 0.2% 
           2: mem: 51.6 MiB (5.5%) command: ddns-plus started by: node pid: 573 cpu: 1.1% 
           3: mem: 48.6 MiB (5.2%) command: arku started by: node pid: 566 cpu: 1.1% 
           4: mem: 37.9 MiB (4.0%) command: pm2 pid: 555 cpu: 0.6% 
           5: mem: 35.4 MiB (3.8%) command: www started by: node pid: 580 cpu: 0.4% 
Info:      Processes: 117 Uptime: 13m Init: systemd v: 237 runlevel: 5 Compilers: gcc: 7.4.0 
           alt: 7 Client: shell wrapper v: 4.4.20-release inxi: 3.0.37

Benchmark #5614 - Brand: Seagate Barracuda