Benchmark #58712 - pibenchmarks.com

Brand: Samsung Fit Plus
USB Flash
#38 / 1,677
399
#1,002 / 1,677
#8 / 93
#11 / 89
3,081
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-04-09 05:44:14
#58,712
3,889
+808 (+20.78%)
EETech1
Samsung

Storage Details
Samsung Fit Plus
USB Flash
238.8G
USB Flash
Samsung
FlashDriveFIT
3.10
5,000
090c:1000
0x090c
0x1000 (Mustek BearPaw 1200 Scanner)
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 400 1.0
Raspberry Pi 400 Rev 1.0
Raspberry Pi Foundation
ARMv7 v7l
4
1,800
500
4 GB
1,600

Operating System

Raspbian GNU/Linux 11 (bullseye)
armv7l

Benchmark Results
77.7 MB/s
59.82 MB/s
62.25 MB/s
5,209 IOPS
2,711 IOPS
20,839 KB/s
10,847 KB/s
13,115 KB/s
16,585 KB/s
10,039 KB/s
17,735 KB/s

inxi Results
System: Kernel: 5.15.32-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=16ad3125-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 wm: Mutter v: 3.38.6 DM: LightDM v: 1.26.0 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.82 GiB used: 532.2 MiB (13.6%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296 Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: x11 server: X.Org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X: loaded: modesetting unloaded: fbdev gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: HDMI-A-1 mapped: HDMI-1 model: NBV27CB2 built: 2021 res: 1920x1080 hz: 60 dpi: 82 gamma: 1.2 chroma: red: x: 0.682 y: 0.314 green: x: 0.271 y: 0.655 blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: 1920x1080, 1920x1080i, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x960, 1280x800, 1280x720, 1024x768, 832x624, 800x600, 720x576, 720x480, 640x480, 720x400 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.32-v7l+ running: yes Sound Server-2: JACK v: 1.9.17 running: no Sound Server-3: PulseAudio v: 14.2 running: yes Sound Server-4: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: up mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: scope: link Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: down mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6606 hci-v: 5.0 rev: 36 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 239.02 GiB used: 7.9 GiB (3.3%) ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: Flash Drive FIT size: 239.02 GiB block-size: physical: 512 B logical: 512 B type: SSD rev: 1100 scheme: MBR SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? Message: No optical or floppy data found. Partition: ID-1: / raw-size: 238.76 GiB size: 234.99 GiB (98.42%) used: 7.85 GiB (3.3%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs uuid: a755e991-ee07-4251-9a93-ddbb10695d94 ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7C7A-DCF2 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA chip-ID: 2109:3431 class-ID: 0900 Device-1: 1-1.3:3 info: MosArt 2.4G Keyboard Mouse type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 062a:5918 class-ID: 0301 Device-2: 1-1.4:4 info: Holtek Raspberry Pi Internal Keyboard type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 04d9:0007 class-ID: 0300 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 304mA chip-ID: 090c:1000 class-ID: 0806 Sensors: Missing: Required tool sensors not installed. Check --recommends Repos: Packages: apt: 2021 lib: 1021 Active apt repos in: /etc/apt/sources.list 1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http: //archive.raspberrypi.org/debian/ bullseye main Processes: CPU top: 5 of 190 1: cpu: 3.0% command: xorg pid: 614 mem: 86.1 MiB (2.2%) 2: cpu: 2.1% command: [usb-storage] pid: 95 mem: 0.00 MiB (0.0%) 3: cpu: 2.1% command: mutter pid: 913 mem: 68.4 MiB (1.7%) 4: cpu: 1.0% command: [kworker/u8:4-events_unbound] pid: 4993 mem: 0.00 MiB (0.0%) 5: cpu: 0.8% command: bash pid: 4775 mem: 2.84 MiB (0.0%) Memory top: 5 of 190 1: mem: 86.1 MiB (2.2%) command: xorg pid: 614 cpu: 3.0% 2: mem: 68.4 MiB (1.7%) command: mutter pid: 913 cpu: 2.1% 3: mem: 66.0 MiB (1.7%) command: lxpanel pid: 918 cpu: 0.3% 4: mem: 37.7 MiB (0.9%) command: pcmanfm pid: 932 cpu: 0.1% 5: mem: 33.1 MiB (0.8%) command: lxterminal pid: 2055 cpu: 0.5% Info: Processes: 190 Uptime: 24m Init: systemd v: 247 runlevel: 5 target: graphical.target tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.15

inxi Results

System:
  Kernel: 5.15.32-v7l+ arch: armv7l bits: 32 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
    vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=16ad3125-02
    rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
  Console: tty 1 wm: Mutter v: 3.38.6 DM: LightDM v: 1.26.0
    Distro: Raspbian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 400 Rev 1.0 details: BCM2711 rev: c03130 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.82 GiB used: 532.2 MiB (13.6%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l family: 7 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1800 min/max: 600/1800 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1800 2: 1800 3: 1800 4: 1800 bogomips: 1296
  Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: x11 server: X.Org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X:
    loaded: modesetting unloaded: fbdev
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: NBV27CB2 built: 2021 res: 1920x1080 hz: 60 dpi: 82
    gamma: 1.2 chroma: red: x: 0.682 y: 0.314 green: x: 0.271 y: 0.655 blue: x: 0.149 y: 0.059
    white: x: 0.314 y: 0.329 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9
    modes: 1920x1080, 1920x1080i, 1680x1050, 1600x900, 1280x1024, 1440x900, 1280x960, 1280x800,
    1280x720, 1024x768, 832x624, 800x600, 720x576, 720x480, 640x480, 720x400
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.32-v7l+ running: yes
  Sound Server-2: JACK v: 1.9.17 running: no
  Sound Server-3: PulseAudio v: 14.2 running: yes
  Sound Server-4: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: up mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  scope: link
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: down mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6606 hci-v: 5.0 rev: 36
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 239.02 GiB used: 7.9 GiB (3.3%)
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: Flash Drive FIT size: 239.02 GiB
    block-size: physical: 512 B logical: 512 B type: SSD rev: 1100 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 238.76 GiB size: 234.99 GiB (98.42%) used: 7.85 GiB (3.3%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: rootfs
    uuid: a755e991-ee07-4251-9a93-ddbb10695d94
  ID-2: /boot raw-size: 256 MiB size: 252 MiB (98.46%) used: 49.2 MiB (19.5%) fs: vfat
    block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: boot uuid: 7C7A-DCF2
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s power: 100mA
    chip-ID: 2109:3431 class-ID: 0900
  Device-1: 1-1.3:3 info: MosArt 2.4G Keyboard Mouse type: Keyboard,Mouse
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 062a:5918
    class-ID: 0301
  Device-2: 1-1.4:4 info: Holtek Raspberry Pi Internal Keyboard type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s power: 100mA
    chip-ID: 04d9:0007 class-ID: 0300
  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive type: Mass Storage
    driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 304mA chip-ID: 090c:1000
    class-ID: 0806 Sensors:
  Missing: Required tool sensors not installed. Check --recommends
Repos:
  Packages: apt: 2021 lib: 1021
  Active apt repos in: /etc/apt/sources.list
    1: deb http: //raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http: //archive.raspberrypi.org/debian/ bullseye main
Processes:
  CPU top: 5 of 190
  1: cpu: 3.0% command: xorg pid: 614 mem: 86.1 MiB (2.2%)
  2: cpu: 2.1% command: [usb-storage] pid: 95 mem: 0.00 MiB (0.0%)
  3: cpu: 2.1% command: mutter pid: 913 mem: 68.4 MiB (1.7%)
  4: cpu: 1.0% command: [kworker/u8:4-events_unbound] pid: 4993 mem: 0.00 MiB (0.0%)
  5: cpu: 0.8% command: bash pid: 4775 mem: 2.84 MiB (0.0%)
  Memory top: 5 of 190
  1: mem: 86.1 MiB (2.2%) command: xorg pid: 614 cpu: 3.0%
  2: mem: 68.4 MiB (1.7%) command: mutter pid: 913 cpu: 2.1%
  3: mem: 66.0 MiB (1.7%) command: lxpanel pid: 918 cpu: 0.3%
  4: mem: 37.7 MiB (0.9%) command: pcmanfm pid: 932 cpu: 0.1%
  5: mem: 33.1 MiB (0.8%) command: lxterminal pid: 2055 cpu: 0.5%
Info:
  Processes: 190 Uptime: 24m Init: systemd v: 247 runlevel: 5 target: graphical.target
  tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Client: shell wrapper v: 5.1.4-release
  inxi: 3.3.15

Benchmark #58712 - Brand: Samsung Fit Plus