Benchmark #60342 - pibenchmarks.com

Brand: Intenso SSDSataIII Series
SSD (2.5" SATA)
#35 / 1,679
444
#244 / 1,679
#242 / 984
#5 / 370
15,929
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-06-11 19:43:37
#60,342
7,881
-8,048 (-102.12%)
Anonymous
g

Storage Details
Intenso SSDSataIII Series
SSD (2.5" SATA)
256G
SSD
Intenso
SSDSataIII
2.5 inch
SATA
3.00
5,000
152d:0578
0x152d (JMicron Technology Corp. / JMicron USA Technology Corp.)
0x0578 (JMS578 SATA 6Gb/s)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.1
Raspberry Pi 4 Model B Rev 1.1
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
118 MB/s
1.88 MB/s
5.19 MB/s
10,864 IOPS
22,555 IOPS
43,458 KB/s
90,220 KB/s
31,766 KB/s
27,053 KB/s
23,598 KB/s
31,525 KB/s

inxi Results
System: Kernel: 5.15.45-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=bab1746c-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles Console: tty 1 wm: Mutter v: 3.38.6 DM: LightDM v: 1.26.0 Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.79 GiB used: 1003.8 MiB (25.9%) gpu: 500 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: x11 server: X.org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X: loaded: modesetting unloaded: fbdev gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-size: Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Denon DENON-AVR built: 2017 res: 1920x1080 hz: 60 dpi: 52 gamma: 1.2 chroma: red: x: 0.639 y: 0.333 green: x: 0.278 y: 0.600 blue: x: 0.149 y: 0.047 white: x: 0.278 y: 0.290 size: 930x530mm (36.61x20.87") modes: 1920x1080, 1920x1080i, 2880x576, 2880x480, 1280x720, 1440x576, 1024x768, 1440x480, 800x600, 720x576, 720x576i, 720x480, 720x480i, 640x480, 720x400 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.45-v8+ running: yes Sound Server-2: PulseAudio v: 14.2 running: yes Sound Server-3: PipeWire v: 0.3.19 running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: mngtmpaddr noprefixroute scope: global IP v6: scope: link WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

inxi Results

System:
  Kernel: 5.15.45-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000
    vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=bab1746c-02
    rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
  Console: tty 1 wm: Mutter v: 3.38.6 DM: LightDM v: 1.26.0 Distro: Raspberry Pi OS
    base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.79 GiB used: 1003.8 MiB (25.9%) gpu: 500 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB desc: d-4x32 KiB! i-4x48 KiB
    L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: x11 server: X.org v: 1.20.11 with: Xwayland compositor: Mutter v: 3.38.6 driver: X:
    loaded: modesetting unloaded: fbdev
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-size: 
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Denon DENON-AVR built: 2017
    res: 1920x1080 hz: 60 dpi: 52 gamma: 1.2 chroma: red: x: 0.639 y: 0.333 green: x: 0.278 y: 0.600
    blue: x: 0.149 y: 0.047 white: x: 0.278 y: 0.290 size: 930x530mm (36.61x20.87")
    modes: 1920x1080, 1920x1080i, 2880x576, 2880x480, 1280x720, 1440x576, 1024x768, 1440x480,
    800x600, 720x576, 720x576i, 720x480, 720x480i, 640x480, 720x400
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.45-v8+ running: yes
  Sound Server-2: PulseAudio v: 14.2 running: yes
  Sound Server-3: PipeWire v: 0.3.19 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: mngtmpaddr noprefixroute scope: global
  IP v6:  scope: link
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block:
    hardware: no software: yes address: 
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

Benchmark #60342 - Brand: Intenso SSDSataIII Series