Benchmark #60389 - pibenchmarks.com

Brand: Intenso SSDSataIII Series
SSD (2.5" SATA)
#34 / 1,539
295
#414 / 1,539
#398 / 875
#85 / 363
6,737
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2022-06-13 01:49:55
#60,389
4,893
-1,844 (-37.69%)
Anonymous

Storage Details
Intenso SSDSataIII Series
SSD (2.5" SATA)
512G
SSD
Intenso
SSDSATAIII
SATA
3.00
5,000
174c:0862
0x174c (ASMedia Technology Inc.)
0x0862 (EP-703A [Stylus Photo PX660 Series])
usb-storage
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 4B 1.2
Raspberry Pi 4 Model B Rev 1.2
Raspberry Pi Foundation
N/A
4
1,500
500
4 GB
1,600

Operating System

Debian GNU/Linux 11 (bullseye)
aarch64

Benchmark Results
136 MB/s
188.17 MB/s
153.63 MB/s
4,529 IOPS
3,940 IOPS
18,119 KB/s
15,762 KB/s
1,031 KB/s
18,273 KB/s
14,245 KB/s
21,280 KB/s

inxi Results
System: Kernel: 5.15.32-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=174c:0862:u console=ttyS0,115200 console=tty1 root=PARTUUID=2c2b2295-02 rootfstype=ext4 fsck.repair=yes rootwait Console: N/A Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery: Message: No system battery data found. Is one present? Memory: RAM: total: 3.78 GiB used: 3.24 GiB (85.9%) gpu: 76 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0 stepping: 3 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432 Features: asimd cpuid crc32 evtstrm fp Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 status: Vulnerable Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu Display: server: No display server data found. Headless machine? tty: 80x40 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio Sound Server-1: ALSA v: k5.15.32-v8+ running: yes Network: Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000 class-ID: mmcnr IF: wlan0 state: down mac: Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fd580000 class-ID: ethernet IF: eth0 state: up speed: 1000 Mbps duplex: full mac: IP v4: type: dynamic noprefixroute scope: global broadcast: IP v6: type: noprefixroute scope: link IF-ID-1: br-8b079da47ae7 state: up speed: 10000 Mbps duplex: unknown mac: IP v4: scope: global broadcast: IP v6: scope: link IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-3: hassio state: up speed: 10000 Mbps duplex: unknown mac: Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all] IF-ID-4: veth1001d8d state: up speed: 10000 Mbps duplex: full mac: IF-ID-5: veth135b95b state: up speed: 10000 Mbps duplex: full mac: IF-ID-6: veth217a149 state: up speed: 10000 Mbps duplex: full mac: IF-ID-7: veth2c6ff4d state: up speed: 10000 Mbps duplex: full mac: IF-ID-8: veth3248694 state: up speed: 10000 Mbps duplex: full mac: IF-ID-9: veth3c76d3c state: up speed: 10000 Mbps duplex: full mac: IF-ID-10: veth531ce3b state: up speed: 10000 Mbps duplex: full mac: IF-ID-11: veth57f1e4e state: up speed: 10000 Mbps duplex: full mac: IF-ID-12: veth5eb4576 state: up speed: 10000 Mbps duplex: full mac: IF-ID-13: veth6abdd21 state: up speed: 10000 Mbps duplex: full mac: IF-ID-14: veth6f636fc state: up speed: 10000 Mbps duplex: full mac: IF-ID-15: veth7a1c4e8 state: up speed: 10000 Mbps duplex: full mac: IF-ID-16: veth7c04e55 state: up speed: 10000 Mbps duplex: full mac: IF-ID-17: veth89f5700 state: up speed: 10000 Mbps duplex: full mac: IF-ID-18: veth8f58ff6 state: up speed: 10000 Mbps duplex: full mac: IF-ID-19: vetha7bec95 state: up speed: 10000 Mbps duplex: full mac: IF-ID-20: vethae4ca8c state: up speed: 10000 Mbps duplex: full mac: IF-ID-21: vethd42526a state: up speed: 10000 Mbps duplex: full mac: IF-ID-22: vethde40d4e state: up speed: 10000 Mbps duplex: full mac: IF-ID-23: vethdf92148 state: up speed: 10000 Mbps duplex: full mac: IF-ID-24: vethefcda5e state: up speed: 10000 Mbps duplex: full mac: IF-ID-25: vethf78dea4 state: up speed: 10000 Mbps duplex: full mac: IF-ID-26: vethfd33d52 state: up speed: 10000 Mbps duplex: full mac: IF-ID-27: vethfd59c49 state: up speed: 10000 Mbps duplex: full mac: WAN IP: Bluetooth: Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: bt-v: 3.0 lmp-v: 5.0 sub-v: 6119 hci-v: 5.0 rev: 156 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept service-classes: rendering, capturing, audio Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

inxi Results

System:
  Kernel: 5.15.32-v8+ arch: aarch64 bits: 64 compiler: N/A parameters: coherent_pool=1M
    8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
    usb-storage.quirks=174c:0862:u console=ttyS0,115200 console=tty1 root=PARTUUID=2c2b2295-02
    rootfstype=ext4 fsck.repair=yes rootwait
  Console: N/A Distro: Raspberry Pi OS base: Debian GNU/Linux 11 (bullseye)
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835 rev: c03112 Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 3.78 GiB used: 3.24 GiB (85.9%) gpu: 76 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 0
    stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt governor: ondemand cores:
    1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: asimd cpuid crc32 evtstrm fp
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:fef05700
    class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu class-ID: gpu
  Display: server: No display server data found. Headless machine? tty: 80x40
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A chip-ID: brcm:bcm2835_audio
    class-ID: bcm2835_audio
  Sound Server-1: ALSA v: k5.15.32-v8+ running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A chip-ID: brcm:fe300000
    class-ID: mmcnr
  IF: wlan0 state: down mac: 
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 
  IP v4:  type: dynamic noprefixroute scope: global broadcast: 
  IP v6:  type: noprefixroute scope: link
  IF-ID-1: br-8b079da47ae7 state: up speed: 10000 Mbps duplex: unknown mac: 
  IP v4:  scope: global broadcast: 
  IP v6:  scope: link
  IF-ID-2: docker0 state: up speed: 10000 Mbps duplex: unknown mac: 
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-3: hassio state: up speed: 10000 Mbps duplex: unknown mac: 
  Message: Output throttled. IPs: 2! Limit: 10! Override: --limit [1-x!-1 all]
  IF-ID-4: veth1001d8d state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-5: veth135b95b state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-6: veth217a149 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-7: veth2c6ff4d state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-8: veth3248694 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-9: veth3c76d3c state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-10: veth531ce3b state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-11: veth57f1e4e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-12: veth5eb4576 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-13: veth6abdd21 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-14: veth6f636fc state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-15: veth7a1c4e8 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-16: veth7c04e55 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-17: veth89f5700 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-18: veth8f58ff6 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-19: vetha7bec95 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-20: vethae4ca8c state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-21: vethd42526a state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-22: vethde40d4e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-23: vethdf92148 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-24: vethefcda5e state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-25: vethf78dea4 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-26: vethfd33d52 state: up speed: 10000 Mbps duplex: full mac: 
  IF-ID-27: vethfd59c49 state: up speed: 10000 Mbps duplex: full mac: 
  WAN IP: 
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address:  bt-v: 3.0 lmp-v: 5.0
    sub-v: 6119 hci-v: 5.0 rev: 156
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
    service-classes: rendering, capturing, audio
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Can't use an undefined value as an ARRAY reference at ./inxi line 12301.

Benchmark #60389 - Brand: Intenso SSDSataIII Series