Benchmark #82580 - pibenchmarks.com

Brand: Intenso SSDSataIII Series
SSD (2.5" SATA)
#35 / 1,679
444
#244 / 1,679
#242 / 984
#5 / 370
15,929
	Amazon.com AliExpress Amazon.ca Amazon.co.uk Amazon.co.jp Amazon.com.au Amazon.de Amazon.es Amazon.fr Amazon.it Amazon.nl Amazon.pl Amazon.se Amazon.sg

Overview
2024-03-25 02:03:58
#82,580
13,500
-2,429 (-17.99%)
root
Intenso High 240GB SATA on UGREEN 30847 USB-SATA casing, on raspberry pi5b 8gb, raspios

Storage Details
Intenso SSDSataIII Series
SSD (2.5" SATA)
240G
SSD
Intenso
SSDSATAIII
2.5 inch
SATA
3.00
5,000
174c:1153
0x174c (ASMedia Technology Inc.)
0x1153 (ASM1153 SATA 3Gb/s bridge)
uas
None

System Board Details
		Amazon.com AliExpress
Raspberry Pi 5B 1.0
Raspberry Pi 5 Model B Rev 1.0
Raspberry Pi Foundation
N/A
4
2,400
910 (+10)
2,133

Operating System

Debian GNU/Linux 12 (bookworm)
aarch64

Benchmark Results
239 MB/s
369.29 MB/s
317.79 MB/s
34,304 IOPS
34,133 IOPS
137,219 KB/s
136,533 KB/s
44,907 KB/s
42,889 KB/s
24,868 KB/s
43,848 KB/s

inxi Results
System: Host: raspberrypi Kernel: 6.6.21-v8-16k+ arch: aarch64 bits: 64 compiler: N/A clocksource: arch_sys_counter parameters: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=e2ace93a-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=AT Desktop: wayfire v: 0.7.5 dm: LightDM v: 1.26.0 Distro: Debian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170 Battery: Message: No system battery data found. Is one present? Memory: System RAM: total: 8 GiB available: 7.86 GiB used: 608.5 MiB (7.6%) igpu: 8 MiB RAM Report: smbios: No SMBIOS data for dmidecode to process PCI Slots: Message: No ARM data found for this feature. CPU: Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8 family: 8 model-id: 4 stepping: 1 Topology: cpus: 1x cores: 4 smt: N/A cache: N/A Speed (MHz): avg: 1600 min/max: 1500/2400 scaling: driver: cpufreq-dt governor: ondemand cores: 1: 1600 2: 1600 3: 1600 4: 1600 bogomips: 432 Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop evtstrm fp fphp lrcpc pmull sha1 sha2 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: CSV2, BHB Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9 compositor: wayfire v: 0.7.5 driver: gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec display-ID: :0 Monitor-1: HDMI-A-1 model: Idek Iiyama PL2595W built: 2022 res: 1920x1200 dpi: 91 gamma: 1.2 chroma: red: x: 0.663 y: 0.329 green: x: 0.298 y: 0.612 blue: x: 0.149 y: 0.063 white: x: 0.314 y: 0.329 size: 535x339mm (21.06x13.35") diag: 633mm (24.9") ratio: 16:10 modes: 1920x1200, 1920x1080, 1920x1080i, 1680x1050, 1280x1024, 1440x900, 1280x960, 1152x864, 1280x720, 1024x768, 800x600, 720x576, 720x480, 640x480, 720x400 API: EGL v: 1.5 hw: drv: broadcom v3d drv: broadcom vc4 platforms: device: 0 egl: 1.4 drv: v3d device: 1 drv: swrast gbm: egl: 1.4 drv: v3d surfaceless: egl: 1.4 drv: v3d x11: egl: 1.4 drv: vc4 inactive: wayland API: OpenGL v: 3.1 vendor: broadcom mesa v: 23.2.1-1~bpo12+rpt3 glx-v: 1.4 es-v: 3.1 direct-render: yes renderer: V3D 7.1 device-ID: 14e4:ffffffff memory: 7.68 GiB unified: yes API: Vulkan v: 1.3.239 layers: 2 device: 0 type: integrated-gpu name: V3D 7.1.7 driver: mesa v3dv v: 23.2.1-1~bpo12+rpt3 device-ID: 14e4:55701c33 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe (LLVM 15.0.6 128 bits) driver: mesa llvmpipe v: 23.2.1-1~bpo12+rpt3 (LLVM 15.0.6) device-ID: 10005:0000 surfaces: xcb,xlib Audio: Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c701400 class-ID: hdmi Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:107c706400 class-ID: hdmi API: ALSA v: k6.6.21-v8-16k+ status: kernel-api tools: alsactl,alsamixer,amixer Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with: 1: pipewire-pulse status: active 2: wireplumber status: active tools: pw-cat,pw-cli,wpctl Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl Network: Device-1: driver: rp1 v: N/A pcie: gen: 2 speed: 5 GT/s lanes: 4 port: N/A bus-ID: 01:00.0 chip-ID: 1de4:0001 class-ID: 0200 IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full mac: XX:XX:XX:XX:XX:XX IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global broadcast: 192.168.X.X IP v6: fe80::75ef:bf9b:6df0:edf8/64 type: noprefixroute scope: link WAN IP: 62.46.X.X Bluetooth: Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A chip-ID: brcm:107d50c000 class-ID: serial Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000 Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0 class-ID: serial Logical: Message: No logical block device data found. RAID: Message: No RAID data found. Drives: Local Storage: total: 281.81 GiB used: 53.63 GiB (19.0%) ID-1: /dev/mmcblk0 maj-min: 179:0 model: SD size: 58.24 GiB block-size: physical: 512 B logical: 512 B type: Removable tech: SSD scheme: MBR SMART Message: Unknown smartctl error. Unable to generate data. ID-2: /dev/sda maj-min: 8:0 vendor: Intenso model: N/A size: 223.57 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 sata: 3.2 speed: 6.0 Gb/s tech: SSD fw-rev: V0609A0 temp: 40 C scheme: MBR SMART: yes state: enabled health: PASSED on: 5d 16h cycles: 186 read: 3.8 MiB written: 1.6 MiB Message: No optical or floppy data found. Partition: ID-1: / raw-size: 57.74 GiB size: 56.73 GiB (98.25%) used: 17.48 GiB (30.8%) fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs uuid: b8316dab-786b-45e8-815c-3d4bbf198d98 ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%) used: 82.3 MiB (16.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1 maj-min: 179:1 label: bootfs uuid: 1E1E-DAB6 ID-3: /media/bullseye/system-boot raw-size: 512 MiB size: 504.1 MiB (98.46%) used: 139.7 MiB (27.7%) fs: vfat block-size: 512 B dev: /dev/sda1 maj-min: 8:1 label: system-boot uuid: 81C9-1C52 ID-4: /media/bullseye/writable raw-size: 223.07 GiB size: 219.53 GiB (98.41%) used: 35.94 GiB (16.4%) fs: ext4 block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: writable uuid: d78ea5c7-a075-476e-acdd-a16cc2187931 Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2 file: /var/swap Unmounted: Message: No unmounted partitions found. USB: Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-2:2 info: Logitech Keyboard K120 type: keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 90mA chip-ID: 046d:c31c class-ID: 0300 Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Device-1: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: mass storage driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 174c:1153 class-ID: 0806 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 3-2:2 info: Microsoft Laser Mouse 6000 type: mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA chip-ID: 045e:00f0 class-ID: 0301 Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Sensors: Src: /sys System Temperatures: cpu: 44.4 C mobo: N/A Fan Speeds (rpm): cpu: 2655 Repos: Packages: pm: dpkg pkgs: 2108 libs: 1169 tools: apt,apt-get Active apt repos in: /etc/apt/sources.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware 3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/raspi.list 1: deb http://archive.raspberrypi.com/debian/ bookworm main Processes: CPU top: 5 of 209 1: cpu: 1.0% command: pcmanfm pid: 1195 mem: 76.6 MiB (0.9%) 2: cpu: 0.7% command: wayfire pid: 1132 mem: 112.5 MiB (1.3%) 3: cpu: 0.5% command: lxterminal pid: 1969 mem: 42.5 MiB (0.5%) 4: cpu: 0.4% command: init pid: 1 mem: 11.9 MiB (0.1%) 5: cpu: 0.4% command: wf-panel-pi pid: 1194 mem: 65.0 MiB (0.8%) Memory top: 5 of 209 1: mem: 112.5 MiB (1.3%) command: wayfire pid: 1132 cpu: 0.7% 2: mem: 76.6 MiB (0.9%) command: pcmanfm pid: 1195 cpu: 1.0% 3: mem: 74.5 MiB (0.9%) command: xwayland pid: 2772 cpu: 0.0% 4: mem: 65.0 MiB (0.8%) command: wf-panel-pi pid: 1194 cpu: 0.4% 5: mem: 56.0 MiB (0.6%) command: xdg-desktop-portal-wlr pid: 1403 cpu: 0.0% Info: Processes: 209 Uptime: 9m Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Shell: Storage.sh (sudo) default: Bash v: 5.2.15 running-in: Storage.sh inxi: 3.3.31

inxi Results

System:
  Host: raspberrypi Kernel: 6.6.21-v8-16k+ arch: aarch64 bits: 64
    compiler: N/A clocksource: arch_sys_counter parameters: reboot=w
    coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3fc00000
    vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1
    root=PARTUUID=e2ace93a-02 rootfstype=ext4 fsck.repair=yes rootwait quiet
    splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=AT
  Desktop: wayfire v: 0.7.5 dm: LightDM v: 1.26.0 Distro: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: ARM System: Raspberry Pi 5 Model B Rev 1.0 details: N/A rev: d04170
    Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 8 GiB available: 7.86 GiB used: 608.5 MiB (7.6%)
    igpu: 8 MiB
  RAM Report: smbios: No SMBIOS data for dmidecode to process
PCI Slots:
  Message: No ARM data found for this feature.
CPU:
  Info: model: N/A variant: cortex-a76 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 4 stepping: 1
  Topology: cpus: 1x cores: 4 smt: N/A cache: N/A
  Speed (MHz): avg: 1600 min/max: 1500/2400 scaling: driver: cpufreq-dt
    governor: ondemand cores: 1: 1600 2: 1600 3: 1600 4: 1600 bogomips: 432
  Features: aes asimd asimddp asimdhp asimdrdm atomics cpuid crc32 dcpop
    evtstrm fp fphp lrcpc pmull sha1 sha2
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 mitigation: CSV2, BHB
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:107c706400 class-ID: hdmi
  Display: wayland server: X.org v: 1.21.X.X with: Xwayland v: 22.1.9
    compositor: wayfire v: 0.7.5 driver:
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :0
  Monitor-1: HDMI-A-1 model: Idek Iiyama PL2595W     built: 2022 res: 1920x1200 dpi: 91 gamma: 1.2 chroma: red: x: 0.663 y: 0.329
    green: x: 0.298 y: 0.612 blue: x: 0.149 y: 0.063 white: x: 0.314 y: 0.329
    size: 535x339mm (21.06x13.35") diag: 633mm (24.9") ratio: 16:10
    modes: 1920x1200, 1920x1080, 1920x1080i, 1680x1050, 1280x1024, 1440x900,
    1280x960, 1152x864, 1280x720, 1024x768, 800x600, 720x576, 720x480,
    640x480, 720x400
  API: EGL v: 1.5 hw: drv: broadcom v3d drv: broadcom vc4 platforms:
    device: 0 egl: 1.4 drv: v3d device: 1 drv: swrast gbm: egl: 1.4 drv: v3d
    surfaceless: egl: 1.4 drv: v3d x11: egl: 1.4 drv: vc4 inactive: wayland
  API: OpenGL v: 3.1 vendor: broadcom mesa v: 23.2.1-1~bpo12+rpt3 glx-v: 1.4
    es-v: 3.1 direct-render: yes renderer: V3D 7.1 device-ID: 14e4:ffffffff
    memory: 7.68 GiB unified: yes
  API: Vulkan v: 1.3.239 layers: 2 device: 0 type: integrated-gpu
    name: V3D 7.1.7 driver: mesa v3dv v: 23.2.1-1~bpo12+rpt3
    device-ID: 14e4:55701c33 surfaces: xcb,xlib device: 1 type: cpu
    name: llvmpipe (LLVM 15.0.6 128 bits) driver: mesa llvmpipe
    v: 23.2.1-1~bpo12+rpt3 (LLVM 15.0.6) device-ID: 10005:0000
    surfaces: xcb,xlib
Audio:
  Device-1: bcm2712-hdmi0 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c701400 class-ID: hdmi
  Device-2: bcm2712-hdmi1 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:107c706400 class-ID: hdmi
  API: ALSA v: k6.6.21-v8-16k+ status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: n/a (root, process) with:
    1: pipewire-pulse status: active 2: wireplumber status: active
    tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse)
    tools: pacat,pactl
Network:
  Device-1: driver: rp1 v: N/A pcie: gen: 2 speed: 5 GT/s lanes: 4 port: N/A
    bus-ID: 01:00.0 chip-ID: 1de4:0001 class-ID: 0200
  IF: wlan0 state: down mac: XX:XX:XX:XX:XX:XX
  IF-ID-1: eth0 state: up speed: 1000 Mbps duplex: full
    mac: XX:XX:XX:XX:XX:XX
  IP v4: 192.168.X.X/24 type: dynamic noprefixroute scope: global
    broadcast: 192.168.X.X
  IP v6: fe80::75ef:bf9b:6df0:edf8/64 type: noprefixroute scope: link
  WAN IP: 62.46.X.X
Bluetooth:
  Device-1: bcm7271-uart driver: bcm7271_uart bus-ID: N/A
    chip-ID: brcm:107d50c000 class-ID: serial
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: XX:XX:XX:XX:XX:XX
    bt-v: 5.0 lmp-v: 9 sub-v: 6119 hci-v: 9 rev: 17e class-ID: 6c0000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff
    link-mode: peripheral accept service-classes: rendering, capturing, audio,
    telephony
  Device-2: bcm7271-uart driver: N/A bus-ID: N/A chip-ID: brcm:serial0
    class-ID: serial
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 281.81 GiB used: 53.63 GiB (19.0%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 model: SD size: 58.24 GiB block-size:
    physical: 512 B logical: 512 B type: Removable tech: SSD     scheme: MBR
  SMART Message: Unknown smartctl error. Unable to generate data.
  ID-2: /dev/sda maj-min: 8:0 vendor: Intenso model: N/A size: 223.57 GiB
    block-size: physical: 512 B logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s
    lanes: 1 mode: 3.2 gen-1x1 sata: 3.2 speed: 6.0 Gb/s tech: SSD
    fw-rev: V0609A0 temp: 40 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 5d 16h cycles: 186
    read: 3.8 MiB written: 1.6 MiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 57.74 GiB size: 56.73 GiB (98.25%) used: 17.48 GiB (30.8%)
    fs: ext4 block-size: 4096 B dev: /dev/mmcblk0p2 maj-min: 179:2 label: rootfs
    uuid: b8316dab-786b-45e8-815c-3d4bbf198d98
  ID-2: /boot/firmware raw-size: 512 MiB size: 510 MiB (99.61%)
    used: 82.3 MiB (16.1%) fs: vfat block-size: 512 B dev: /dev/mmcblk0p1
    maj-min: 179:1 label: bootfs uuid: 1E1E-DAB6
  ID-3: /media/bullseye/system-boot raw-size: 512 MiB
    size: 504.1 MiB (98.46%) used: 139.7 MiB (27.7%) fs: vfat block-size: 512 B
    dev: /dev/sda1 maj-min: 8:1 label: system-boot uuid: 81C9-1C52
  ID-4: /media/bullseye/writable raw-size: 223.07 GiB
    size: 219.53 GiB (98.41%) used: 35.94 GiB (16.4%) fs: ext4
    block-size: 4096 B dev: /dev/sda2 maj-min: 8:2 label: writable
    uuid: d78ea5c7-a075-476e-acdd-a16cc2187931
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) priority: -2
    file: /var/swap
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-2:2 info: Logitech Keyboard K120 type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1
    speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 90mA
    chip-ID: 046d:c31c class-ID: 0300
  Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-1:2 info: ASMedia ASM1153 SATA 3Gb/s bridge type: mass storage
    driver: uas interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
    mode: 3.2 gen-1x1 chip-ID: 174c:1153 class-ID: 0806   Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-2:2 info: Microsoft Laser Mouse 6000 type: mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0
    speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 100mA
    chip-ID: 045e:00f0 class-ID: 0301
  Hub-4: 4-0:1 info: super-speed hub ports: 1 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  Src: /sys System Temperatures: cpu: 44.4 C mobo: N/A
  Fan Speeds (rpm): cpu: 2655
Repos:
  Packages: pm: dpkg pkgs: 2108 libs: 1169 tools: apt,apt-get
  Active apt repos in: /etc/apt/sources.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
    3: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/raspi.list
    1: deb http://archive.raspberrypi.com/debian/ bookworm main
Processes:
  CPU top: 5 of 209
  1: cpu: 1.0% command: pcmanfm pid: 1195 mem: 76.6 MiB (0.9%)
  2: cpu: 0.7% command: wayfire pid: 1132 mem: 112.5 MiB (1.3%)
  3: cpu: 0.5% command: lxterminal pid: 1969 mem: 42.5 MiB (0.5%)
  4: cpu: 0.4% command: init pid: 1 mem: 11.9 MiB (0.1%)
  5: cpu: 0.4% command: wf-panel-pi pid: 1194 mem: 65.0 MiB (0.8%)
  Memory top: 5 of 209
  1: mem: 112.5 MiB (1.3%) command: wayfire pid: 1132 cpu: 0.7%
  2: mem: 76.6 MiB (0.9%) command: pcmanfm pid: 1195 cpu: 1.0%
  3: mem: 74.5 MiB (0.9%) command: xwayland pid: 2772 cpu: 0.0%
  4: mem: 65.0 MiB (0.8%) command: wf-panel-pi pid: 1194 cpu: 0.4%
  5: mem: 56.0 MiB (0.6%) command: xdg-desktop-portal-wlr pid: 1403
    cpu: 0.0%
Info:
  Processes: 209 Uptime: 9m Init: systemd v: 252 target: graphical (5)
  default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Shell: Storage.sh (sudo) default: Bash v: 5.2.15 running-in: Storage.sh
  inxi: 3.3.31

Benchmark #82580 - Brand: Intenso SSDSataIII Series